Cletrac.org

Cletrac Tractor Discussion => Military Cletracs => Topic started by: GeorgeOhio on August 08, 2011, 04:57:45 PM



Title: M2 parts on ebay.
Post by: GeorgeOhio on August 08, 2011, 04:57:45 PM
http://cgi.ebay.com/ebaymotors/Oliver-Cletrac-Cleveland-Tractor-M2-Antique-residue-_W0QQcmdZViewItemQQhashZitem2a12b52b8bQQitemZ180702489483QQptZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/Cletrac-Starter-Hercules-WXLC3-Autolite-ML4215-606-_W0QQcmdZViewItemQQhashZitem53e890427aQQitemZ360384053882QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


Found these while googling.
Thought I would share them.


Title: Re: M2 parts on ebay.
Post by: hotratz on August 09, 2011, 08:03:28 AM
Looks like they've got quite a few track sets.


Title: Re: M2 parts on ebay.
Post by: GeorgeOhio on August 09, 2011, 04:40:42 PM
The tracks are for Sherman Tanks.
All the transmissions in the background of the pictures are from Sherman Tanks or other tracked vehicles with the Sherman tank drive train.


Title: Re: M2 parts on ebay.
Post by: GeorgeOhio on August 09, 2011, 08:56:37 PM
http://cgi.ebay.com/Hercules-Engine-WXLC-3-Carburetor-/260758598198

Are the Gen set WXLC-3 carbs useable on the M2 HST??


Title: Re: M2 parts on ebay.
Post by: GeorgeOhio on August 09, 2011, 09:08:09 PM
http://cgi.ebay.com/HERCULES-WXLC-3-GAS-ENGINE-PARTS-MANUAL-HO-PAYLOADERS-/330584356813

Manual on the WXLC-3, but not for the cletrac. Will this work for the M2 Hercules??


Title: Re: M2 parts on ebay.
Post by: GeorgeOhio on August 09, 2011, 09:12:21 PM
http://www.agriconmanuals.com/hercules-engines-hercules-wxlc3pts-parts-manual-p-32604.html

another manual


Title: Re: M2 parts on ebay.
Post by: Ol Paint on August 10, 2011, 07:24:49 PM
The carburetor posted above is a downdraft carb--the M2 installation needs an updraft carb.  It won't work without a lot of modification/fabrication.

The manual should be good for doing engine work.

Douglas


Title: Re: M2 parts on ebay.
Post by: GeorgeOhio on August 11, 2011, 09:49:54 AM
Thanks Douglas.