Cletrac.org

Cletrac Tractor Discussion => Military Cletracs => Topic started by: Matt Rimmer on September 13, 2011, 09:41:03 AM



Title: M2 Cooling hose sets
Post by: Matt Rimmer on September 13, 2011, 09:41:03 AM
I need to replace the rubber cooling hoses on my M2 and in order to get the size of hose I need I have to buy it in three foot lengths so I will have more than I require. I intend to make as many M2 cooling hose sets as I can,keeping a spare set for myself there should be another four or five sets.

Would anyone be interested in complete rubber cooling hose sets?.

I am also getting the metal sections reproduced and sourcing the correct hose clips.

Matt. 


Title: Re: M2 Cooling hose sets
Post by: wanderingwillys on March 06, 2012, 04:46:24 AM
Have any progress on getting the metal bits for the cooling system made?

Matt


Title: Re: M2 Cooling hose sets
Post by: Matt Rimmer on August 19, 2012, 04:12:38 AM
Hi Matt,

Not really,I have now been loaned originals of the metal parts I didn't have,just need to get the funds together to get some made. Had a slight setback with my MG project when the "rebuilt" waterpump came back with the casting broken.

I will post an update as soon as I have something to report.

Regards,
Matt.


Title: Re: M2 Cooling hose sets
Post by: wanderingwillys on September 08, 2012, 03:14:55 PM
What part of your pump is broken I have a few cores that also have misc broken ears and casting bits - maybe we can mix and match something to get you going - a few pictures would be good...

Also did you find an interchange number for the mechanical seals (carbon / ceramic rotating seals) or did your unit have the packing nuts with a compressable packing for a seal?

Matt