Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: countryguy828 on December 03, 2018, 10:09:35 PM



Title: IXK3 starter parts
Post by: countryguy828 on December 03, 2018, 10:09:35 PM
I have been working on my HG and turns out that the bendix/drive gears are pretty much shot. The gear snaps in as it should but the threads are so worn it jambs up and won't release. Is there a source for these parts? It could use a set of brushes too. I have had pretty good luck finding delco parts but not so much on autolites based on past experience.

By any chance anyone have an exploded view of the starter? I have a sneaking suspicion there is extra spacers/washers in there and I want to double check against something.

Thanks,
Dave


Title: Re: IXK3 starter parts
Post by: Jack in NB on December 05, 2018, 02:32:09 PM
Hello Dave -

Have you tried Zimmerman Oliver Cletrac?

They have probably the best stock on the continent. And if they don't have it they will probably help you find the parts.

http://www.olivercletrac.com/


Title: Re: IXK3 starter parts
Post by: Robert Barbour on December 05, 2018, 04:04:01 PM
The Auto-Lite MZ-4098 was the first starter used on the HG, from SN 5GA000 to 25GA377. At SN 25GA378 they switched to a Delco 11029602.  I to would recommend Zimmerman's, they are very good to deal with.


Title: Re: IXK3 starter parts
Post by: countryguy828 on December 06, 2018, 07:56:40 PM
Thank You for the help fellas. thanks to your part number I was able to find this https://www.ebay.com/itm/NEW-STARTER-DRIVE-MPLS-MOLINE-WHITE-OLIVER-HERCULES-COCKSHUTT-COMBINE-HARVESTER/360826502271?hash=item5402ef7c7f:g:MqcAAMXQnYJQ9Nsl:rk:11:pf:0 on ebay. Unfortunatley the price is out of the range I can justify at the current time. But it gives me needed information to possibly find another source. Lots of times I make what I can but this is a little out of my capability as of now.

Dave