Cletrac.org
October 23, 2014, 04:55:41 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: 10/5/12 - All new members are REQUIRED to fill out the signature section of your profile. Otherwise, you may be deleted from the forum. This is to help me determine if you are a member or if you are a spammer. Thank you.

9/22/12 - I ask that you please add a signature line to your profiles on the Cletrac Forum to help me to determine who is spam and who is not. You don't need to drop everything and do this immediately, but please do it when you get a minute and you are visiting the forum. Just go to http://cletrac.org/forum2010/index.php?action=profile and put something in the signature area. If you no longer want to be a member on the Cletrac Forum, please remove your membership.

8/10/11 - Added a new board: Trucking and Hauling

5/30/11 - Just added several new pictures to the Photo Gallery, including several Alfta Track OC-4 working in snow logging, several from the Chicago Road Show, and some from a logging show (not all Oliver/Cletrac). All these pictures are from around 1963 and were scanned from old slides given to me by my late friend John W. Davis. Go to the Photo Gallery and click on "NEW" to see these pictures. Quality is marginal, but I think you will enjoy them.

2/13/11 - Just added a new board "New members introduce yourselves here".

Folks, I just added a new photo gallery where you can upload your own pictures with descriptions, etc. Right now this is in the beta testing stage to see how it works out. Give it a try, but please keep a backup copy of your pictures just in case we decide to use something else. I would prefer you use your real name on the photo gallery, but if you really don't want to, please use the same username as on the forum. Please put your images into the proper categories and take care when your write out your descriptions and image names so people can search for them. I am learning this as we go. At least at the beginning, I have it set up where the administrator has to approve members. I am afraid we may get porn spam in here if we leave it open. To get to the photo gallery, use this link: http://cletrac.org/photos/

Folks, when you join the forum, or when you get the chance to update your Profile, please be sure to put your location and interests. Filling out your signature would help as well. I've been getting some spammers joining and posting links to sites that are completely unrelated to Cletrac or Oliver, or anything to do with tractors. It would make it easier for me, as well as all the other members, if you guys would put your location and interest in your profile. See http://cletrac.org/forum2010/index.php?topic=1299.msg5184#msg5184

Thanks,
Administrator
 
  Home Help Search Calendar Login Register  
  Show Posts
Pages: [1] 2
1  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: One stop shop for cross referenced parts? on: January 21, 2012, 12:44:39 PM
I work for NAPA in Mansfield, Ohio. If you can give me some applicable information, I can look up alot of older part numbers or interchanges. We still have parts available for older ignition systems that can be accessed by our unit parts guide. If you need distributor parts, give me a Dist.# and a Manufacturer Name. We have alot of older gasket sets available for some older Continental and Hercules engines, but I need to know the model numbers, to look them up.
2  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: AG-6 distributor (specifically the cap) on: December 18, 2011, 09:26:06 AM
No, I looked it up in the Echlin Unit Parts Guide at the NAPA store where I work. We can find distributor parts by the distributor number. I used the Delco Distributor Number that was posted by Arbie.
3  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: AG-6 distributor (specifically the cap) on: December 13, 2011, 06:55:52 PM
Glad I could help. Take your old parts in with you when you go to the NAPA store. They can look up a graphical display on their computor and check to see if the numbers I gave you match your parts. The Echlin Buyers Guide for ignition parts also has pictures of these parts. Good luck with your tractor.
4  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: AG-6 distributor (specifically the cap) on: December 13, 2011, 05:32:01 PM
I checked on your parts today. According to the Echlin Ignition Unit Parts Guide, for a Continental F226 with a Delco Distributor with number, 1111766, your tune up parts should be as follows. Points, CS763A. Condenser, RR174. Cap, RR142. Rotor,RR83. We only keep the points and condenser in stock, but we can order the cap and rotor from our warehouse in Columbus, Ohio. Your local NAPA store should be able to get these items for you as well.
5  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: AG-6 distributor (specifically the cap) on: December 12, 2011, 07:51:49 PM
Go to NAPA. They can look up parts for any industrial engine distributor by using the distributor number. I will look tomorrow at NAPA, where I work and see if I can get you a part number.
6  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: OC46 Diesel Electrical System has power even with key "off" on: November 05, 2011, 08:22:16 AM
Make sure that you polarize the charging system anytime that you disconnect any part of the system.
7  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: OC18 Updates on: July 27, 2011, 07:23:04 AM
Hey Logger. Funny story. I can't count the number of times I have been in dumb situations and dug myself in deeper coz I had no-one to help. You know that, hmmm, how do I drive two tractors at the same time conundrum! Or one tractor quits, so you get another to haul it outta the way, then it quits too etc. etc.
Last week was trying to load an OC46. Wanted to haul it with my nice OC46. I broke a brake lever linkage at the split pin hole. OK, so drag out the other OC46 I have - a bit rough - needs some TLC. The gear lever jumps out of the rails and I cannot get it relocated, so now that one is stuck out of gear and in the way too! THREE OC46s in a row. Grrr!
I gave up at that stage...getting dark, being eaten by bugs, and didn't want to mess up the yard trying to drag them both out with a rubber wheeled tractor Embarrassed Those are the days when we wonder why we didn't buy something new  Grin
Wow, This is a hobby, aren't hobbies supposed to be fun and relaxing? When I have a day like that, I just want to close the door to the garage and hide inside. Hope things get better for you. Just take it One thing at a time.
8  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: Oliver BD on: May 08, 2011, 08:26:47 AM
Ah Bob, You know that we don't believe you unless you post some pictures. Be nice and share with us all.
9  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: OK... I got a question on drain plug locations on: May 02, 2011, 08:00:50 AM
Man, it's great to have a little one that is interested in an old tractor. My 3 year old grandson loves being in the garage helping me with my projects. We are looking forward to going to the annual tractor show at the fairgrounds this year. He knows all the brands and loves anything with crawler tracks.
10  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: Troubleshoot hydraulic pump flow on: March 16, 2011, 07:27:13 AM
Hey, 440, Now that is some innovative engineering. Sometimes we just have to come up with a solution to a problem, It don't have to be pretty, just get the job done. Nomally when I'm working in the garage at home, I'm all by myself, so I have had to come up with some creative ideas to get the task done.
11  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: hi back seat on a HG? on: March 03, 2011, 07:34:50 AM
Some seats used on various lawn and garden equipment mount with one 1/2-13 bolt. My MTD tractor has this type of seat. Check anyone that sells parts for Tractors or Industrial Lift Trucks. The NAPA Lawn and Garden Equipment Catalog has some different seats available. I think our local Tractor Supply has some seats in stock.
12  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: Troubleshoot hydraulic pump flow on: January 13, 2011, 10:12:57 PM
Look and see if there is a test port on your hydraulic valve, where you can tap a gauge into and check main relief pressure. You could also connect a gauge in line at your lift cylinder and check pressure there. I feel that if the blade will lift the front of the tractor in the down position, that you are getting adequate pressure and the pump is not at fault.
13  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: OC-46 Build Progress on: January 06, 2011, 06:47:22 PM
My wife would rather that I have something to work on at home, because then she knows where I'm at. I'm presently restoring a 1969 Ford Torino GT Fastback.
14  Cletrac Tractor Discussion / HG, OC-3, OC-4 & General / Re: No Down Pressure on Ware Loader on: January 06, 2011, 06:43:59 PM
Please be careful when operating the system for the first time if there is a possibility of air in the system. The action of the cylinders may be jerky and uncertain until the air works its way out. When I was an industrial truck mechanic, we would often rebuild hydraulic cylinders, when we put
 them under hydraulic pressure for the first time, they would sometimes really jerk or jump until the air got out.
15  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: OC-96 Brake Question on: January 04, 2011, 12:12:24 PM
See if you can get a number off the old starter, and I will see if we can cross reference it to our number. Perhaps I can get you a NAPA number to use at your local store.
Pages: [1] 2
Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!