Cletrac.org
July 06, 2022, 08:08:59 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: 10/5/12 - All new members are REQUIRED to fill out the signature section of your profile. Otherwise, you may be deleted from the forum. This is to help me determine if you are a member or if you are a spammer. Thank you.

9/22/12 - I ask that you please add a signature line to your profiles on the Cletrac Forum to help me to determine who is spam and who is not. You don't need to drop everything and do this immediately, but please do it when you get a minute and you are visiting the forum. Just go to http://cletrac.org/forum2010/index.php?action=profile and put something in the signature area. If you no longer want to be a member on the Cletrac Forum, please remove your membership.

8/10/11 - Added a new board: Trucking and Hauling

5/30/11 - Just added several new pictures to the Photo Gallery, including several Alfta Track OC-4 working in snow logging, several from the Chicago Road Show, and some from a logging show (not all Oliver/Cletrac). All these pictures are from around 1963 and were scanned from old slides given to me by my late friend John W. Davis. Go to the Photo Gallery and click on "NEW" to see these pictures. Quality is marginal, but I think you will enjoy them.

2/13/11 - Just added a new board "New members introduce yourselves here".

Folks, I just added a new photo gallery where you can upload your own pictures with descriptions, etc. Right now this is in the beta testing stage to see how it works out. Give it a try, but please keep a backup copy of your pictures just in case we decide to use something else. I would prefer you use your real name on the photo gallery, but if you really don't want to, please use the same username as on the forum. Please put your images into the proper categories and take care when your write out your descriptions and image names so people can search for them. I am learning this as we go. At least at the beginning, I have it set up where the administrator has to approve members. I am afraid we may get porn spam in here if we leave it open. To get to the photo gallery, use this link: http://cletrac.org/photos/

Folks, when you join the forum, or when you get the chance to update your Profile, please be sure to put your location and interests. Filling out your signature would help as well. I've been getting some spammers joining and posting links to sites that are completely unrelated to Cletrac or Oliver, or anything to do with tractors. It would make it easier for me, as well as all the other members, if you guys would put your location and interest in your profile. See http://cletrac.org/forum2010/index.php?topic=1299.msg5184#msg5184

Thanks,
Administrator
 
  Home Help Search Calendar Login Register  
  Show Posts
Pages: [1] 2 3
1  Shows, Events, Video / Shows and Events / 100 Year Anniversary Cleveland Tractor/Cletrac show at Tulare, CA 2016 on: July 09, 2015, 09:53:36 PM
Come join us and make this the largest Cletrac show ever.
Whether it's a Cleveland Motor Plow, Cleveland Tractor or a Oliver/Cletrac running or not, dust em off and display them at this once in a lifetime event.
We have lots of commitments already so reserve your space with the California Oliver Cletrac Club soon.
See poster image for details.
2  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: Cletrac K20 Parts Needed/Attachments Questions on: March 06, 2015, 12:40:27 AM
Email me. I've got a complete orchard K
Roland
thrkings@yahoo.com
3  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: Going to reproduce the mod W & K "L" shaped pre cleaner "air horn" on: January 16, 2015, 02:38:30 AM
As soon as I can get the tinsmith to get energized I'll have some.
It's frustrating. This guy can do anything and keeps promising me he'll get it done "in a couple of weeks" and it doesn't happen. He's made some great stuff for me and is local. I can only push so hard and don't want to be that nag that he hates to see walk through the door.
Seems like so many of the skilled arteest types are like that.
Keepin my fingers crossed....
4  Cletrac Tractor Discussion / Subjects Related To All Models / bottle jack sprocket puller info on: August 02, 2014, 03:24:56 PM
I saw someone had made a puller using a bottle jack to remove rear sprockets.
Not sure if the thread was here or online somewhere but does anyone out there have pictures available so I can fabricate one?
RB
5  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: Weidely engine parts on: February 25, 2014, 12:43:59 AM
Erik,
The carb your'e looking for--What model Cletrac is it for?
 
6  Cletrac Tractor Discussion / Subjects Related To All Models / Re: Does this style of track use a tapered pin? on: June 17, 2013, 01:35:43 AM
Here's a pic of the tapered pin end. I hope it stays attached (the pic)
7  Cletrac Tractor Discussion / Subjects Related To All Models / Does this style of track use a tapered pin? on: June 12, 2013, 01:40:46 PM
These are the early 6.375" wide tracks. The inboard ends of the pins on both right and left tracks are tapered for ease of installation. Does anybody out there know if this style track uses pins that are tapered over the full length and are meant to be driven from one side only?
Thanks
8  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Going to reproduce the mod W & K "L" shaped pre cleaner "air horn" on: February 23, 2013, 07:40:19 PM
I successfully reproduced the Cyclone air strainer for the mod H. They turned out perfect.
I'm now going to give the much simpler W and K  L shaped "air horn" pre cleaner a go and I'm looking for good pics and dimensions.
I have an sample piece but it's pretty beat. It looks like it slips over a 2.5" diam. pipe. Anyone have some really good  examples out there.
Also, may attempt the early AG pre cleaners. I also need pics of that. My example is thrashed.
email me...
Roland
9  Welcome & Rules - Please read before posting / New members introduce yourselves here / Re: Newbie in Oregon - OC-96 on: February 23, 2013, 07:26:44 PM
Newbie,
Where are you? I'm in Grants Pass. Not many Cletrac folk in my area.
I've got to go to the Brooks meet to see any.
Roland
10  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Looking for fuel selector/shut off valve off H, W, or K20 on: February 08, 2012, 01:24:07 PM
Looking for a brass fuel valve. It selected the fuel source, kerosene or gas, and had a shut off position also.
Thanks,
Roland


11  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: H Tin on: February 01, 2012, 12:00:59 PM
Erik,
Send me a PM with your phone #
Roland--Grants Pass, OR
12  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / Re: AG-6 distributor (specifically the cap) on: November 28, 2011, 04:50:33 PM
NAPA is where I get mine. Not hard at all.

Good luck
13  Cletrac Tractor Discussion / All Models Except HG, OC-3, OC-4 & General / I will be making some reproduction parts for the model H--Anyone interested?? on: August 02, 2011, 11:50:48 AM
Because of my own needs I've decided to make parts for my 1918/1919 model H
Lower track wheel mud guards/shields parts #s 506 and 507 for the later H. These should run around $250-$300 per 4 piece set plus shipping. They will be exactly as original except for the 6 mounting screw holes. Each will have the hole placement marked but not drilled as your track frame may have holes in slightly different positions.

Cyclone air cleaner/strainer--The incedibly rare original part # 811 that was probably thrown away and replaced with a more efficient type.
These will be pricey. Again exactly as original. If I'm not happy with them you won't either.

Throttle shafts for the Kingston L2 carburetor. New shaft modified to accept the existing butterfly with screws, not the staple. Kit will also include 2 bronze shaft bushings and the loan of the reamer to drill your brass carb. body. Not sure on $ yet.

Maybe--upper track rollers with bracket--MAYBE

I'm going to make 1 RUN ONLY of these parts 6 sets mudguards, 6 air cleaners, 6 shaft & bushing sets.

Let me know ASAP if you're intereseted.
Roland
14  Parts & Stuff / Product and Accessory Forum / Re: Looking for a green hi temp exhaust manifold paint for my H on: July 18, 2011, 09:52:28 AM
Thanks guys. I'm still looking and will let you know if I find something.
15  Parts & Stuff / Product and Accessory Forum / Looking for a green hi temp exhaust manifold paint for my H on: July 03, 2011, 11:31:27 AM
I'm looking for a high temperature green paint to use on my exhaust manifold. I don't want to porcelainize.
It needs to be a gloss paint that will closely match the Hart Parr green-( Martin Senour 53-8753 ) which is darker than John Deere green.
I've looked everywhere.    Any body out there know of paint that will work ??

Thanks..
Pages: [1] 2 3
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!