Cletrac.org
February 26, 2020, 12:43:25 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: 10/5/12 - All new members are REQUIRED to fill out the signature section of your profile. Otherwise, you may be deleted from the forum. This is to help me determine if you are a member or if you are a spammer. Thank you.

9/22/12 - I ask that you please add a signature line to your profiles on the Cletrac Forum to help me to determine who is spam and who is not. You don't need to drop everything and do this immediately, but please do it when you get a minute and you are visiting the forum. Just go to http://cletrac.org/forum2010/index.php?action=profile and put something in the signature area. If you no longer want to be a member on the Cletrac Forum, please remove your membership.

8/10/11 - Added a new board: Trucking and Hauling

5/30/11 - Just added several new pictures to the Photo Gallery, including several Alfta Track OC-4 working in snow logging, several from the Chicago Road Show, and some from a logging show (not all Oliver/Cletrac). All these pictures are from around 1963 and were scanned from old slides given to me by my late friend John W. Davis. Go to the Photo Gallery and click on "NEW" to see these pictures. Quality is marginal, but I think you will enjoy them.

2/13/11 - Just added a new board "New members introduce yourselves here".

Folks, I just added a new photo gallery where you can upload your own pictures with descriptions, etc. Right now this is in the beta testing stage to see how it works out. Give it a try, but please keep a backup copy of your pictures just in case we decide to use something else. I would prefer you use your real name on the photo gallery, but if you really don't want to, please use the same username as on the forum. Please put your images into the proper categories and take care when your write out your descriptions and image names so people can search for them. I am learning this as we go. At least at the beginning, I have it set up where the administrator has to approve members. I am afraid we may get porn spam in here if we leave it open. To get to the photo gallery, use this link: http://cletrac.org/photos/

Folks, when you join the forum, or when you get the chance to update your Profile, please be sure to put your location and interests. Filling out your signature would help as well. I've been getting some spammers joining and posting links to sites that are completely unrelated to Cletrac or Oliver, or anything to do with tractors. It would make it easier for me, as well as all the other members, if you guys would put your location and interest in your profile. See http://cletrac.org/forum2010/index.php?topic=1299.msg5184#msg5184

Thanks,
Administrator
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: M2 Shop Manual  (Read 4516 times)
0 Members and 1 Guest are viewing this topic.
Matt Rimmer
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 26



View Profile
« on: August 10, 2011, 11:34:40 AM »

Hi,
I have been trying to get a workshop manual for my M2 before doing any work on the clutch but so far have drawn a blank,I have the operators instruction book and have just ordered the parts book from Portrayal Press but if anyone can point me in the direstion of a workshop manual I would be very grateful,or if anyone can scan the section dealing with the clutch that would be a huge help!.

Thanks,

Matt.
Logged

1944 Cletrac M2 project ongoing.
Jim Baker
phpBB Operator
***
Offline Offline

Gender: Male
Posts: 17


View Profile
« Reply #1 on: September 17, 2011, 11:58:12 AM »

Matt, I have a Maintenance Manual for Cletrac Model MG1 , and Ordnance Model Medium M2 - (United States War Department) which I got from  Landis Zimmerman (olivercletrac.com), to the tune of $51 including shipping.  My reason for getting is was to glean as many photos as possible that would help me build a scale model.  I have done that (although I am WAY behind in making the model).  It did not take any ink off of the pages!  So if you would like to have it for, say $30 plus postage, send me a note.  I think it weighs about a pound, but don't know where you are, so will have to figure out the postage.

Jim
Logged

MG 2 Paper Model
Matt Rimmer
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 26



View Profile
« Reply #2 on: September 18, 2011, 05:52:02 AM »

Hi Jim,

Many thanks for your reply and kind offer. I managed to source the reprint manuals from a guy in Belgium via another UK Cletrac owner(thanks Paul!).

Matt.
Logged

1944 Cletrac M2 project ongoing.
wanderingwillys
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 22



View Profile
« Reply #3 on: October 16, 2011, 10:08:14 PM »

I have a repo shop manual - what about the clutch are you looking to find out? It'll be tomorrow but I can scan in the pages... Let me know what you're after...

Matt
Logged

1940 M2 AG     S/N 1X2072
1942 M2 MG-1 S/N 4JA836
1943 M2 MG-1 S/N 9JA422
wanderingwillys
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 22



View Profile
« Reply #4 on: October 17, 2011, 07:53:56 PM »

If anyone else needs the section I have it as a PDF file - just under 1 MB so it's to bit to post up here but happy to send it where ever...

Matt
Logged

1940 M2 AG     S/N 1X2072
1942 M2 MG-1 S/N 4JA836
1943 M2 MG-1 S/N 9JA422
Blake Malkamaki
Administrator
phpBB THE Boss
*****
Offline Offline

Gender: Male
Posts: 1733



View Profile WWW
« Reply #5 on: October 17, 2011, 10:44:33 PM »

I could put it right on the site Matt. If you want you can email it to me. 1 mb isn't that much to put on the site.

Thanks,
Blake
Logged

My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.
Blake Malkamaki
Administrator
phpBB THE Boss
*****
Offline Offline

Gender: Male
Posts: 1733



View Profile WWW
« Reply #6 on: October 18, 2011, 06:50:06 PM »

I put the engine specifications and clutch service bulletin here: http://cletrac.org/pages/specifications.html under "Technical".

Blake
Logged

My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.
Matt Rimmer
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 26



View Profile
« Reply #7 on: December 23, 2011, 01:54:29 PM »

Many thanks guys. I'm still waiting for my water pump to come back from the rebuilders,it's been three months with several excuses from them,I think I'll have to ask them to just send it back and I'll find another place to do it.

Matt.
Logged

1944 Cletrac M2 project ongoing.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!