Cletrac.org
July 18, 2018, 05:15:57 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: 10/5/12 - All new members are REQUIRED to fill out the signature section of your profile. Otherwise, you may be deleted from the forum. This is to help me determine if you are a member or if you are a spammer. Thank you.

9/22/12 - I ask that you please add a signature line to your profiles on the Cletrac Forum to help me to determine who is spam and who is not. You don't need to drop everything and do this immediately, but please do it when you get a minute and you are visiting the forum. Just go to http://cletrac.org/forum2010/index.php?action=profile and put something in the signature area. If you no longer want to be a member on the Cletrac Forum, please remove your membership.

8/10/11 - Added a new board: Trucking and Hauling

5/30/11 - Just added several new pictures to the Photo Gallery, including several Alfta Track OC-4 working in snow logging, several from the Chicago Road Show, and some from a logging show (not all Oliver/Cletrac). All these pictures are from around 1963 and were scanned from old slides given to me by my late friend John W. Davis. Go to the Photo Gallery and click on "NEW" to see these pictures. Quality is marginal, but I think you will enjoy them.

2/13/11 - Just added a new board "New members introduce yourselves here".

Folks, I just added a new photo gallery where you can upload your own pictures with descriptions, etc. Right now this is in the beta testing stage to see how it works out. Give it a try, but please keep a backup copy of your pictures just in case we decide to use something else. I would prefer you use your real name on the photo gallery, but if you really don't want to, please use the same username as on the forum. Please put your images into the proper categories and take care when your write out your descriptions and image names so people can search for them. I am learning this as we go. At least at the beginning, I have it set up where the administrator has to approve members. I am afraid we may get porn spam in here if we leave it open. To get to the photo gallery, use this link: http://cletrac.org/photos/

Folks, when you join the forum, or when you get the chance to update your Profile, please be sure to put your location and interests. Filling out your signature would help as well. I've been getting some spammers joining and posting links to sites that are completely unrelated to Cletrac or Oliver, or anything to do with tractors. It would make it easier for me, as well as all the other members, if you guys would put your location and interest in your profile. See http://cletrac.org/forum2010/index.php?topic=1299.msg5184#msg5184

Thanks,
Administrator
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: OC-3 auxiliary transmission  (Read 491 times)
0 Members and 1 Guest are viewing this topic.
yonson
phpBB Operator
***
Offline Offline

Gender: Male
Posts: 8


View Profile
« on: January 12, 2018, 03:17:11 PM »

Haven't posted here in a while.  Am strongly considering installing Model A auxiliary trans in my '52 OC-3 as per the 2 write-ups found on this site.   Anyone know where I might find adapters & related items needed for the project?  Thanx
Logged
Jim Leap
phpBB Master Operator
****
Offline Offline

Gender: Male
Posts: 32



View Profile
« Reply #1 on: January 17, 2018, 07:55:06 PM »

Hello,

Since you've got 36 views and no replies I'll take a stab at a reply to your question about where to get adapters etc. for a Model A transmission install in an OC3. I'm no expert here - I've got one HG with a model A transmission and I am in the process of setting up my second HG with a model A transmission. I am fairly familiar with the conversion process and, unless you can find a "Trasco" unit, you will need to provide adapter plate specs to a qualified fabrication shop and have them build the adapter. Obviously you will need the Model A transmission too. The adapters are easy to make but they take time and attention to detail to get them properly lined up and to get the spacings correct relative to the input shaft, throw out bearing etc. The fabrication instructions on this site are well written and should get you headed in the right direction. There are lots of options for the "U joint" assembly. It needs to be short enough to fit between the Model A transmission and the Clark transmission. You can use a Model A U-joint but I think a better approach is to have a fabrication shop build something that will allow you to remove the U-joints without moving the transmission or engine to allow clearance. The design in the write-up will work and is simple to build. As far as I know there are no "kits" commercially available for this conversion. Hopefully some other viewers will chime in here. There is a heading on this site specific to auxiliary transmissions under the HG heading. That would be a better location for this discussion.

Jim
Logged

Jim Leap
HG 68
HG 42
yonson
phpBB Operator
***
Offline Offline

Gender: Male
Posts: 8


View Profile
« Reply #2 on: January 18, 2018, 11:30:01 AM »

Thanks for the reply.  I have examined the process posted by John De Marrais and subsequent update by Dick Wolcott (both are very informative articles) and as a retired machinist/machine tool rebuilder, am aware of the need for accuracy.  Was hoping for the off chance that someone might have some of the pieces for sale as I do not have access to machine tools & would have to farm it all out. 
 
Logged
yonson
phpBB Operator
***
Offline Offline

Gender: Male
Posts: 8


View Profile
« Reply #3 on: January 19, 2018, 10:40:15 AM »

BTW, I could have posted to the HG auxiliary trans site but it seems to have been dormant for the past 7 months.  Hence, my post to this site, which is somewhat more active.
Logged
5000-nut
phpBB Operator
***
Offline Offline

Posts: 6


View Profile
« Reply #4 on: January 20, 2018, 07:29:58 PM »

If you have a good drill press and bits you will be ok. Big hole I think is 4" that's the hardest to cut. A small lathe and you can made a drive shaft..  I would post pics but never have to this site and not sure how to, but if someone would type up how I will post picks of my build
Logged

Oc3
1956oc3
phpBB Master Operator
****
Offline Offline

Posts: 27


View Profile
« Reply #5 on: January 20, 2018, 08:06:53 PM »

Hi, I too am collecting the parts to do this. I have a transmission, clutch plate and a spare bell housing to chop down. Just need the shaft parts and the time to do it. Pics of your build would be great.
Logged

Scottie
Doug424
phpBB Jobsite Boss
*****
Offline Offline

Posts: 177


View Profile
« Reply #6 on: February 01, 2018, 07:43:45 AM »

I was working on this a few years ago and started to get castings made based on the Trasco unit. I got a pattern made and made a couple of castings. The casting cost is rather high and trying to find an iron foundry today that will make them isn't easy thanks to the government forcing all the small foundries out of business.  I may try again as I heard of a foundry that may make them, but cost is the main factor.
Logged

HG's (several) OC-3's, (many), OC-4, OC-46,
OC-96, OC-12, OC-126, Cletrac AD2
Cletrac DD, Cletrag AG-6
Many other Crawlers, Tons of junk
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!