Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: aussie Evan on May 16, 2005, 11:07:45 AM

Title: DDH water pump seal
Post by: aussie Evan on May 16, 2005, 11:07:45 AM
Congrats on an excellent site

 My father has owned a ddh with 10' hyd blade & cable winch on rear since 1960's Very little work & has sat unused since 1982.
We started it recently & I am impressed !!!
We have replaced air diaphrams in steering changed oil etc but ran hot so had radiator core cleaned and replaced hoses but waterpump leaks excessivley
Can I get seal in Australia ? or modify to suit common 2 peice seals readily available?
Would appreciate any Aus contacts for parts
Regards Evan

ps. loved reading others Q&A
Title: water leak
Post by: cletracboy on May 16, 2005, 07:43:30 PM
Hello

Have you tried any specialist who rebuilt water pumps, I found a local firm who could replace the old seals for off the shelf modern ones they had to do some limited machining but not much I think.  very fortunate to be on the edge of the black country ( for anyone who doesn't know, its a very industrialised area in the middle of England, black from soot from the factorys) there isn't much you can't have repaired or made around here.  
Also has it got a grease nipple? grease may help reduce the leak.  Good luck, Sam