Text only | Text with Images

Cletrac.org

Parts & Stuff => Parts & Services Suppliers => Topic started by: trumpets3u on January 27, 2006, 09:30:11 PM

Title: OC-12 steering clutch parts
Post by: trumpets3u on January 27, 2006, 09:30:11 PM
I'm looking for steering clutch band parts for a OC-12
               Thanks
Title: clutch
Post by: walter hudson on January 29, 2007, 01:17:58 PM
They can be relined at any clutch/brake rebuilder .
Walter
Title:
Post by: Blake Malkamaki on January 29, 2007, 10:49:27 PM
The original lining is called Scandinavian 022. It's a soft woven lining. Landis Zimmerman sells some lining with copper wire in it. He sells lots of it and likes it, but I am afraid of small pieces of copper ending up in the oil pump and in all the bearings.

If your tractor has spot turn, you should put about 1 inch of harder lining on the ends of the bands, in addition to the regular lining, to make it steer better.

Blake
Title: Re: OC-12 steering clutch parts
Post by: Doug424 on November 20, 2015, 09:23:45 PM
Are you sure that's copper? I've seen a lot of lining that has brass woven into it. I think the brass is considered to be good, but never heard of copper.
Title: Re: OC-12 steering clutch parts
Post by: Blake Malkamaki on November 22, 2015, 04:40:49 AM
I think you're right Doug. Probably brass. I'm not 100% sure.

Blake
Title: Re: OC-12 steering clutch parts
Post by: Doug424 on November 24, 2015, 11:49:22 PM
This might be the stuff here:

http://www.mcmaster.com/#brake-lining/=zyeakr

Scroll down to the last item called "High Strength" it's brass woven
Title: Re: OC-12 steering clutch parts
Post by: Blake Malkamaki on November 25, 2015, 08:04:28 PM
It could be, I'll have to measure what I have. It doesn't say whether it is designed to run in oil or not. The lining I bought has a curve to it so it will more easily conform to the bands.
Text only | Text with Images