Does anyone have the part number for the final drive pinion gear in a HG?
Thanks........DeLong1
Before someone sends you a part number count the number of teeth on yours because the last HG tractors used a different pinon than earlier tractors. In the 55 years since they quit production it may have been changed and you could have early or a late set up.
Thanks for the reply John, I guess I was jumping the gun a little as I don't have the final apart yet. 20 years ago some of the balls from the pinion brg got in the pinion and bull gear teeth, wasn't a pretty sight. I made a few teeth out of 7018 welding rod and that kept it going for a few more years. Then I grafted a bull gear from a Avery (GG) on the hub and that went a few more, now It has sat for a dozen years or so now I going to fix it up with a few modifications. Rebuilt engine, DeMarris Model A trans, Braden 10,000 PTO winch on the back. I have posted a few pics' on my site if you want to view the progress. Will be updated as I continue with the repairs.
Here is a link to my site;
http://mhcable.com/~cdelong/HG%20Dozer/ (http://mhcable.com/~cdelong/HG%20Dozer/)
The part number for a 15 tooth final drive pinion is 112872 which I got from somewhere, But per the "final edition" Oliver Parts Book dated December 1958, the 15 tooth is 116950 & the 14 tooth is 606430F, and for high serial # units it's 15 tooth & 117600.
So check your parts book and compare serial numbers.
Dick