Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: GARTH CARRIER on August 11, 2006, 12:27:46 AM

Title: CLETRAC H MODLE
Post by: GARTH CARRIER on August 11, 2006, 12:27:46 AM
HEY TO ALL;  I'M A NEW CLETRAC OWNER (1918 H MODLE). HOPEFULLY SOMEBODY CAN HELP ME.  MY TRACTOR NEEDS NEW STEERING  BAND LINING, WHAT MATERIAL IS USED, WHAT TRANS/DIFF OIL IS NEEDED?
THANKS GARTH
Title:
Post by: Blake Malkamaki on August 11, 2006, 01:25:33 AM
I moved your post into the right place Garth.

The later Cletracs used 50 wt non-detergent motor oil in the transmission and final drives, as well as in the upper and lower track wheels and idlers. Since everything inside the H is pretty much the same, I would assume they would use the same oil.

The original lining was called Scandinavian 022. I don't know if it's available anymore, but there are soft linings out there that will work. Zimmerman's sells a lining with copper wire in it, but I would be very cautious about using something with metal as it will ultimately get into the bearings and gears.

Blake