Print Page - Replacement carb for K-20

Title: Replacement carb for K-20
Post by: royboy on April 11, 2007, 04:46:54 PM

I just purchased a Cletrac K-20 ser#6335. It is an older restoration but missing the correct carb. I was wondering what some of you are using in place of the original carb? Any help would be greatly appriciated. Tks Roy

Title:
Post by: Bob on April 17, 2007, 02:20:33 AM

I would think you should be able to use any updraft carb with the same size throught. Worst case you might have to make an adapter.

Bob

Title: Bob
Post by: royboy on April 17, 2007, 03:15:52 AM

Hi Bob, After doing some research and talking with some other people, you are right, my manifold measures 1.44 and the Ford 8N measures 1.38 and all I have to do is make an adapter. Tks Roy

Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: royboy on April 11, 2007, 04:46:54 PM