Print Page - heil dozer blade question

Title: heil dozer blade question
Post by: harry111 on November 13, 2007, 12:22:09 AM

does anyone have info on the heil dozer set up ? i need to find a way to repair the openings where the pins go for the hydaulics... thanks

Title:
Post by: cletracattack on November 13, 2007, 12:43:50 AM

Hello Harry, If you are talking about the area around the pins being wore I usually build them up with weld & grind them to fit with a barrel style grindstone. Jim.

Title:
Post by: harry111 on November 13, 2007, 12:47:02 AM

there isnt a hard steel bushing for this where i could drill the opening to fit the bushing ? thanks

Title: bushing
Post by: walter hudson on November 13, 2007, 02:20:21 AM

My Heil blade has bronze bushings where the cyl. pins fit .

Title:
Post by: harry111 on November 13, 2007, 04:32:36 AM

where would i begin looking for bushings ???

Title:
Post by: cletracattack on November 13, 2007, 11:18:31 AM

Sorry Harry, Yes walter is right mine also has bronze bushings in the cylinder eyes. I,ve done most of the other joints except for those. For bushings I would try Landis in Ephrata, Pa. They are listed in the advertisers section in thi website.

Title:
Post by: Bob on November 13, 2007, 11:54:57 PM

Try a local bearing or parts store. We have 2 here locally and I have had good luck with them. If they can't get what you want you can get something close and machine it to fit.

Bob

Title:
Post by: harry111 on November 14, 2007, 03:46:42 AM

thanks all ill try local first. bought a motor from landis last week. took the trip to pa from northern n.y. . nice guy

Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: harry111 on November 13, 2007, 12:22:09 AM