Title: Marvel Schebler Carb. TSX 403 Help
Post by: Orangeman on February 17, 2008, 07:51:41 PM
Post by: Orangeman on February 17, 2008, 07:51:41 PM
Does anyone hava a venturi for the MS TSX 403 that they would be willing to sell? I am overhauling the carb for my HG and the venturi in this carb is missing.
How about vendors, I was thinking that VE Peterson might have a replacement. I need to get this carb back together so I can run the machine to tap a few maple trees.
Thanks in advance for your thoughts or help. Orangeman
How about vendors, I was thinking that VE Peterson might have a replacement. I need to get this carb back together so I can run the machine to tap a few maple trees.
Thanks in advance for your thoughts or help. Orangeman
Title: Carburetor.
Post by: John Schwiebert on February 18, 2008, 12:50:57 AM
Post by: John Schwiebert on February 18, 2008, 12:50:57 AM
To get you going I would say that a venturi out of any TSX with that SAE venturi size would at least get you going. Let me do a little looking tomorrow if time permits.
Title:
Post by: Orangeman on February 18, 2008, 11:08:42 AM
Post by: Orangeman on February 18, 2008, 11:08:42 AM
Hello John: Thanks for the reply, I was thinking that the venturi would be sized according to the ID dimension of the carb throat per ASAE standards, which is consistent with your suggestion.
I will see if I can adapt a venturi out of a MS carb that would go on an Allis Chalmers B, C, and CA tractors. I believe that they used a similar if not identical ID of the air throat and venturi on the MS carbs.
Take Care John! Orangeman...
I will see if I can adapt a venturi out of a MS carb that would go on an Allis Chalmers B, C, and CA tractors. I believe that they used a similar if not identical ID of the air throat and venturi on the MS carbs.
Take Care John! Orangeman...
Title:
Post by: Oliver_collector on February 18, 2008, 05:43:21 PM
Post by: Oliver_collector on February 18, 2008, 05:43:21 PM
Try this place. I have had good luck with them in the past.
//http://www.bctruckelectric.com/
//http://www.bctruckelectric.com/
Title: carb
Post by: walter hudson on February 28, 2008, 03:57:45 AM
Post by: walter hudson on February 28, 2008, 03:57:45 AM
The carb for the N series ford tractors is similar All of the internals should be the same .