Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: okcarhauler on April 19, 2008, 11:42:40 PM

Title: New oc-3 owner need outer bearings for rear drive
Post by: okcarhauler on April 19, 2008, 11:42:40 PM
Help, I need the outer wheel bearings/ race and the small outer seal for the right drive hub.  Anybody got any ideas where I can purchase them, and does anyone have the part #'s?  Any help would be much appreciated.
Title:
Post by: Eric Carlson on April 21, 2008, 03:59:00 AM
The bearing numbers should be stamped on the cone and race both. Maybe somebody can help you out with the seal numbers.
Landis Zimmerman out east probably has the parts you need and he's nice to talk with. His phone number is (717) 738-2573

Eric
Title:
Post by: Jack in NB on April 21, 2008, 11:43:22 AM
My parts book and notes show seal numbers CR 23634, National 470764 2.375 x 2.996 x .5, with a Surplus seal nr 50764 2 7/16 x 3 x .5.

The seals are installed with the lips facing out, to keep dirt out.

The bearing - cup 26822, cone 26885. I'm guessing these are Timkin numbers, but have no cross ref information.

I was able to get them from local suppliers, but I'd bet Zimmerman's prices are better.
Title:
Post by: okcarhauler on April 24, 2008, 04:17:00 AM
Thanks for all of your help, I'm ordering the parts now.