Print Page - track rollers

Title: track rollers
Post by: Scott Vassar on February 08, 2009, 05:57:24 PM

would lower track rollers from any cletrac be iterchangable from one cletrac model to another?I saw a lower track roller on ebay from an oc3 that looked the same as the ones on my "AD". thanks,scott

Title: Track Rollers
Post by: chrisvdv on May 31, 2009, 07:07:59 PM

I guess you would need to compare the Oliver part numbers. I will try to post the HG/OC3 ones here later, but I do not have any other crawler parts manuals. Zimmermans (Ephrata, PA) will know of course.

Title: Track Rollers Part Numbers
Post by: oliverchris on May 31, 2009, 11:36:12 PM

Not including the bearing, bushing, shaft etc., for HGs and OC3s the track rolllers are part # 112 365.
Shaft & bearing & bushing is same in both too # 117 143 and 112 741 and 112 743.
In fact whole lower track wheel assembly has its own part #, 119 238 to include everything above - and is same in HGs and OC3s.

One exception - earlier HGs had a wheel shaft #112300 which was later replaced by 117 143.

Now you need someone else to look these up in their parts books...

Title:
Post by: Bob on June 01, 2009, 02:42:16 AM

I will look in my A parts book, but I am pretty sure they are not the same. An A is alot heavier built than an HG or OC3 ever thought of being.

Bob

Title: track rollers
Post by: Scott Vassar on June 10, 2009, 04:00:48 AM

thanks guys. I guess I wont go after the one on ebay.I was not sure if they were the same. regards,scott

Cletrac.org

Cletrac Tractor Discussion => Subjects Related To All Models => Topic started by: Scott Vassar on February 08, 2009, 05:57:24 PM