Text only | Text with Images

Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: Tom in NH on February 15, 2003, 09:21:12 PM

Title: I am back....still have Oliver HG
Post by: Tom in NH on February 15, 2003, 09:21:12 PM
Hi gang,
I am back after about 10 months....been too busy with family and work...married life will do that to you. Anyways I am still working on the HG...same as the OC-3. I have the gearbox out and the transmission gears removed ( to make it easier to drill out the broken bolts where the final drive case attached to). Boy is it in rough shape...transmission main shaft spline is wasted, gears are stripped on the edge, etc. Slow and time consuming but worth the therapy. Lucky I have the parts manual to refer to. Hope to have it moving again this year.
Regards,
Tom
Title:
Post by: pvcarey on February 16, 2003, 04:22:32 PM
sounds like you have a project started, can you post some pictures for us?
Title: question about sending pics...
Post by: Tom in NH on February 16, 2003, 06:03:16 PM
How do I attach 9 pictures? Seems like I can only attach 1 item.
Title:
Post by: erik on February 17, 2003, 09:01:09 AM
Tom
I donÃ,´t think itÃ,´s possible to post more then one picture at a time, better send them one by one.
Erik
Title:
Post by: Eric Severance on February 17, 2003, 04:11:53 PM
Tom,
    I have some HG and OC-3 partsers over here if I can help out in any way. I know those final drives had a habit of loosening up and reaking havok on the studs and transmission housing.
                  Eric in VT
Title: thanks...here goes
Post by: Tom in NH on February 18, 2003, 12:27:23 AM
Erik and Eric,
thanks for the replies...here goes with the pics....I hope I don't mess anything up!
Regards,
Tom
Title: HG picture
Post by: Tom in NH on February 18, 2003, 12:28:08 AM
Title: HG pics
Post by: Tom in NH on February 18, 2003, 12:29:32 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:29:54 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:30:39 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:30:57 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:31:20 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:31:40 AM
Title:
Post by: Tom in NH on February 18, 2003, 12:31:56 AM
Title:
Post by: erik on February 18, 2003, 09:06:13 AM
I love the look of that blade setup, what brand is it? The Anderson blade looks much neater and lighter though.

Does anyone have sales leaflets, drawings, close up pictures etc. of the Anderson blade? I want to make my own because I canÃ,´t find any in Sweden.

Tom, keep posting pictures!

Erik
Title: it is an Anderson frame
Post by: Tom in NH on February 20, 2003, 12:35:30 AM
Erik,
See picture.
Tom
Title: Anderson
Post by: erik on February 20, 2003, 12:36:39 PM
Tom, please post some pictures of the Anderson blade frame, IÃ,´m going to make my own so I need good close up photos to draw plans from.

When the plans are drawn I just need some one to fill in the measurements.
Erik
Title:
Post by: Blake Malkamaki on February 20, 2003, 07:07:53 PM
Quoteit is an Anderson frame
Erik,
See picture.
Tom

I deleted Tom's picture as it was over 538 KB!!! I made it smaller and am posting it here. PLEASE keep the pictures under 100 KB max and preferably smaller. They should be no more than 600 pixels wide. We'll run out of space with these big files.

Blake
Title:
Post by: Tom in NH on February 21, 2003, 05:07:28 AM
Title: sorry about that Blake
Post by: Tom in NH on February 21, 2003, 05:09:47 AM
Didn't know my camera was set for a high resolution...won't happen again.
Regards,
Tom
Title:
Post by: Blake Malkamaki on February 21, 2003, 06:18:08 PM
Oh I'm not mad Tom. I was just going through the site doing some cleanup work.
Text only | Text with Images