Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: UKHG on April 17, 2003, 07:24:46 PM

Title: HG Magnetos
Post by: UKHG on April 17, 2003, 07:24:46 PM
Does anybody know the type of magneto that should be fitted to a HG- getting information over here in the UK is difficult. Does anyone have the full specification, otherwise what mag do other HG owners have?
Title:
Post by: Tom in NH on April 18, 2003, 12:23:56 AM
I have a Wico magneto in mine...I think most HG's and OC-3's had this type.
Tom
Title: Mags
Post by: ggibby on April 18, 2003, 01:02:04 AM
I agree with Tom, Most did have the Wico.
Occasionally though the FairBanks was substituded.
I had one on my HG when I bought it.
I am sure there are other makes that will work to.
And don't forget about the distrubtors that replaced some mags and were mounted in the same location.
No reason why you could not get these to work also.
Good Luck,
GG
Title:
Post by: pvcarey on April 18, 2003, 02:13:31 AM
I also have a Wico on my HG and on my OC3 but on the oc3 the last ouner took out the mag, drilled a hole in the cap, mounted a coil ran a wire from the kill post on the mag and hot wire to a switch and it seams to run good, it's not my way of doing things but will do for now.
Ron
Title:
Post by: Blake Malkamaki on April 18, 2003, 02:46:20 AM
An Eiseman is a better mag than a Wico if you can find one. My General has one of theirs. Not sure the model though.