Purchased a 1951 OC3 with Ware Loader this past fall... to add to my ever growing collection.Have rebuilt EVERYTHING, all bearings,bushings, pins, shafts you name it. However I could use a little help...I need a photo of the clutch pedal stop...this area was hacked up and my manuals don't show any views of it. I did reinforce the complete frame rails with 1/2'' plate to beef up the area forward of the tranny were there prone to crack. This crawler does have the aux trans, which is a godsend. We had an HG on the farm when I was a kid and it had a blade, and it would have worked better with lower gears. My other question is were the trunnion and outer support bracket mate...there is a grease fitting on the bracket but my manuals don't show a bushing...the inner support bearing has a bushing...seams odd, I would thing there would be one. Thanks a ton...I'm really excited to find a support group such as this to share the old iron with. Kevin
Welcome Kevin,
I believe the track frame bracket never had a bushing but was repaired with one. (I think) ::)