Hello, looking at a paper pulley and was wondering if any of you might know if it is correct for the Cletrac HG/OC-3 PTO.
Measures about 8 1/4" diameter and 7 1/4" wide. The hub is 1 1/4" diameter tapered bore with 1/4" keyway. Weighs 14 pounds. Inside the hub has the number "113864" in the casting. Four holes on the hub and eight through rivets holding the laminated paper together. Any and all help appreciated.
PS. If this isn't the correct one, does someone have one that they might part with.
Thanks
Hi Tom. I have measured one I have here. It is the same size and configuration as yours. Too much grease build-up on mine to find a casting number right now...I am in my retail art gallery clothes!
Looking at parts numbers from the manuals for HG and OC3s I don't see that exact casting number, but it is close to that given for OC3 & HG. Casting numbers and part numbers don't always match up anyway. I checked all my OC4 manuals. Nothing matches in there either.
Reconditioned pulleys for HG/OC3 are about $235! :'(
Thanks Chris. I was pretty sure it was the item but over the years I've learned that it's good ask because when you assume......well you know. I must have boxes of parts that I thought would be a prefect fit for that special project.....NOT!!!!