Hey guys I was wondering if someone could post some pictures for me.
I'm working slowly on my HG. Trying to figure out what some stuff should look like.
1: Clutch pedal area
2: driveshaft cover / battery tray
3: PTO engage lever
4: under seat toolbox (I think thats what goes there)
Thank,
Dave
Here's one to start you off, but your best bet would be to get yourself the parts and operator's manuals from Floyd County Museum, Charles City, Iowa (641) 228-1099
Thanks Chris,
I have the service manual but it isn't very clear. One of the ones thats been copied a hundred times.
I will have to post some pics about what I am curious about.
Dave
The toolboxes are pretty rare. But they just slide into a recess found on some pan seats. To my mind they are not big enough - they are just a thin rectangular box. I have a home-made one on my HG. Will try to get a pic of it soon.
I figured with a good picture and some measurements I can probably make something up that is close to original looking. Don't plan on really using it, just want it there since th bracket is on the seat.
Dave
Here is a closeup of where the clutch pedal mounts to the frame. Is there a pin broken off of something here? It looks like that may be the case and another one added, I am not sure and wanted someone to confirm whats going on here.
Dave
From memory, that looks right with the clutch pedal going on that round rod that sticks out the left hand side, but I will have to go and look. Maybe that square bolt head has been added?
The bolt head seems to act as a stop to keep the pedal from going too far forward. Guess I will leave it there.
Dave
That's right, but I was wondering if normally there's a tab welded or folded there.
Here's the rod 'stop' that is there instead of the nut you have
I wonder if they just welded the nut on there to make it stop a little early or take up for the pedal bushing being worn.
Dave