Text only | Text with Images

Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: cork on November 12, 2012, 05:10:29 PM

Title: Frame to Bellhousing bolts
Post by: cork on November 12, 2012, 05:10:29 PM
  I'm working on a HG68.  The IXK motor is bad and needs to come out.  My question is, Are there bolts behind the track hangers that bolt the frame to the bellhousing? I know on my 42's that blind bolts exist..2 on each side.  I'd be tickled if I didn't have to remove so much to get the motor out.  Thanks  Cork
Title: Re: Frame to Bellhousing bolts
Post by: fraser1 on November 12, 2012, 10:10:38 PM
Yes.
Title: Re: Frame to Bellhousing bolts
Post by: oliverchris on November 13, 2012, 01:28:25 AM
I posted a thread on here showing how to get them out without removing half the machine!
http://cletrac.org/forum2010/index.php?topic=3371.0
Title: Re: Frame to Bellhousing bolts
Post by: cork on November 13, 2012, 12:41:52 PM
Thank you Chris.  On a related note I've never received the bulletin you asked me to share.  If I get it I will.  Cork
Text only | Text with Images