Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: oliverchris on February 02, 2013, 06:33:18 PM

Title: Before and after - my 'new' OC46
Post by: oliverchris on February 02, 2013, 06:33:18 PM
Found in a field, hardly used, in Virginia. One broken brake band, cracked distributor cap - most everything else, excellent  :)
Got a nice back-fill blade with it too.
Checked over and all hoses replaced by Harold Zimmerman - painted up the road by Frank Hoover.
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on February 02, 2013, 06:53:23 PM
And at home carrying an 800lb. ball of serpentine stone. One of my side-jobs: I supply raw carving stone to stone sculptors.
Title: Re: Before and after - my 'new' OC46
Post by: Blake Malkamaki on February 03, 2013, 01:01:32 AM
Wow! That's a beautiful machine Chris!
Title: Re: Before and after - my 'new' OC46
Post by: hotratz on February 13, 2013, 02:26:00 PM
Wow! Nice!
Title: Re: Before and after - my 'new' OC46
Post by: cork on February 13, 2013, 03:02:38 PM
Chris,  1st class find and job!
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on February 21, 2013, 07:08:35 PM
More pics
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on February 21, 2013, 07:21:18 PM
More pics
Title: Re: Before and after - my 'new' OC46
Post by: hotratz on February 22, 2013, 02:33:16 PM
How long did it take you to restore it. Mine took almost three years,  :-[ It sure is a beaut!
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on February 22, 2013, 09:24:26 PM
Well, I know this sounds insane, but it took Harold Zimmerman about a week and a half in labour, and it took the paint guy a couple of days. That's how well this machine was preserved.

After 60 years, we put in the following: new plugs, points, distributor cap, thermostat, water pump kit, fuel pump, gas tank, a few water hoses, all hydraulic hoses, oil pan, one idler shaft & bushings, radiator re-core, new battery + ground strap, two new steering bands and some gaskets! That was it! The idler shaft was not even critical - but since we had the tracks off.

A dream find, really  :o
Title: Re: Before and after - my 'new' OC46
Post by: hotratz on February 22, 2013, 10:29:34 PM
Wow, That is insanely lucky  :o. Seems like every single part I pulled off of mine had to have work done to it. Mine was mostly dissembled when I got it. Lots of issues to address. I'm sure my labor alone was worth more than the whole machine is worth today. Just glad it's done finally.
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on March 01, 2013, 01:49:52 PM
Mine's pretty darned good, thanks, but to be honest your's is REALLY a work of art! I hope everyone clicks on your 'OC46 Restore Pics' link to see for themselves! Inspirational!
Title: Re: Before and after - my 'new' OC46
Post by: hotratz on March 02, 2013, 12:36:46 AM
Thank you Chris. Inspiration, if only it could be packaged and sold by the pound. :D
Title: Re: Before and after - my 'new' OC46
Post by: Gazer61 on March 02, 2013, 03:25:47 AM
Hotratz
I was wondering, is your machine still as pretty as the pictures??
I know you said that you were going to work it, but work and paint can not coexist
Title: Re: Before and after - my 'new' OC46
Post by: hotratz on March 05, 2013, 07:20:34 PM
It's been worked enough to remove all of the paint from the outside surfaces of the tracks and the bottom front edge of the bucket but it's still pretty clean.
Title: Re: Before and after - my 'new' OC46
Post by: oliverchris on April 11, 2013, 09:24:14 PM
Talking of getting the new tractor dirty  ;D
Title: Re: Before and after - my 'new' OC46
Post by: cork on April 12, 2013, 04:24:25 PM
  Just think how muddy it would be if it wasn't the dry season. ;D