Print Page - ixb3 replacment

Title: ixb3 replacment
Post by: pvcarey on July 20, 2003, 03:23:44 PM

Is any one here familiar with the Continental Y-91? Will it have the torque and HP to push ect. in a HG. any input will help All I know at this time is its a 4 cyl. 2 7/8 bore 3 1\2 stroke 91 cc.
Thanks Ron

Title:
Post by: thecatskinner on July 20, 2003, 06:56:06 PM

If you don't want to work it this would probably be OK but that engine is rated at (Nebraska Tractor Test #531) at 18.87 Belt HP and 17.05 Draw bar in a MH Pacer.
More important is the speed, ratings are at 1800 RPM with a no-load governed speed of 2050 RPM.

Might work well in a race:o:P;);)

Title: Y Continental
Post by: John Schwiebert on July 20, 2003, 11:28:56 PM

Why do you want to change? Why give up1/3 of the displacement you have now?

Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: pvcarey on July 20, 2003, 03:23:44 PM