Text only | Text with Images

Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: TNCRAWLER on July 24, 2003, 04:43:45 PM

Title: BDH GUAGES
Post by: TNCRAWLER on July 24, 2003, 04:43:45 PM
I have 3 guages on the dash,,amp meter, oil pressure,, and the third one I cant make out.. I think it is a fuel pressure guage..please advise oh wise ones..


crawlin
Title:
Post by: Dave Peters on July 25, 2003, 04:32:16 PM
Water temp?
Title:
Post by: Blake Malkamaki on July 25, 2003, 10:53:36 PM
Some have viscometers that tell oil viscosity.
Title:
Post by: cletracboy on July 26, 2003, 12:11:35 PM
Can you trace what it is connected to from the back of the guage, both the water temp and viscometer will have a thin pipe if its the viscometer it will run to a small sender below the oil filters, if its water temp then it may go to the water manifold ontop of the engine or some other point on the cooling system. Sam
Text only | Text with Images