Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: we@nb on November 29, 2014, 04:59:04 PM

Title: cant start oc-46 warm
Post by: we@nb on November 29, 2014, 04:59:04 PM
I have an OC-46 with the 3 cyl gas engine. Lately it wont start when warmed up .Let it cool down and it will start. Any ideas what this could be ?
Title: Re: cant start oc-46 warm
Post by: Blake Malkamaki on November 30, 2014, 04:36:34 AM
Have you checked the spark right after you shut it down when hot, or as you are trying to start it while hot?
Title: Re: cant start oc-46 warm
Post by: we@nb on November 30, 2014, 12:54:08 PM
no .whats the best way to do that?
Title: Re: cant start oc-46 warm
Post by: Blake Malkamaki on November 30, 2014, 02:02:16 PM
Take one of the spark plug wires off one of the plugs and attach it to a new (or good used) plug and have someone hold it against the engine block while you try to start the engine. See if there is a spark across the plug's gap. This would be the first step in determining if you have an electrical problem or not. Once this is determined, you can move on to something else.

Blake
Title: Re: cant start oc-46 warm
Post by: Doug424 on December 01, 2014, 03:09:38 AM
I've seen coils fail when they are hot. If you don't get a spark, a bad coil might be your problem.