Text only | Text with Images

Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: Bill Kycia on June 30, 2015, 01:59:42 AM

Title: e-38 sprocket removal
Post by: Bill Kycia on June 30, 2015, 01:59:42 AM
need to remove rear sprocket from my e-38.any tips,tools etc. seems like it could be a ball buster job,or not. Bill in CT.
Title: Re: e-38 sprocket removal
Post by: Blake Malkamaki on June 30, 2015, 07:27:58 PM
Bob built a tool for that. Let's see if he jumps here and gives an answer.
Title: Re: e-38 sprocket removal
Post by: Bill Kycia on July 01, 2015, 01:02:58 AM
Blake,.if he doesnt respond I will call him.Part 2 of this question,does anyone have a good used sprocket ?I know Landis has them,but a little pricey for just a show tractor. Thanks Bill in CT.
Title: Re: e-38 sprocket removal
Post by: Bob on July 01, 2015, 01:57:02 AM
Yeah Built a press jigger. worked good
Title: Re: e-38 sprocket removal
Post by: Bill Kycia on July 02, 2015, 12:22:03 AM
Bob,send it over,with that sprocket.  Bill.
Title: Re: e-38 sprocket removal
Post by: Bob on July 04, 2015, 12:23:57 PM
Send Earl to get it. Its a 20C sprocket, not sure if its the same...
Text only | Text with Images