Print Page - 6-way hydraulic front blade

Title: 6-way hydraulic front blade
Post by: ashacresfarm on January 18, 2004, 08:13:31 PM

Looking to find out value and availablity of a 6 way hydrolic front blade for an OC6 crawler.. or possibly a 6 way blade that can be modified to fit an OC 6 crawler.

Thanks
Dan

Title:
Post by: Blake Malkamaki on January 19, 2004, 12:14:02 AM

Dan, I don't think anyone made a blade for the OC-6 as it was strictly a farm tractor. You may be able to adapt something to it, but you'd be better off with an OC-4 or OC-9. Someone else may have some better ideas for you.

Blake

Title:
Post by: ashacresfarm on January 19, 2004, 03:44:40 AM

I already own the OC 6 and I found some one that had a MF blade that , I think, can be modified to use on the OC 6 just wasn't sure of the value of the blade.

Title: 6 way blade for OC/HG models
Post by: t3customs on July 10, 2005, 02:58:18 PM

Dan,

I am designing a 6 way blade for Hg 42 through 0C-6, I an making all new mounting brackets my design is very simular to the new Catapiller D5H which can be seen at www.cat.com (http://www.cat.com), this design is very strong and it fits the narrow width of the OC's. I will have it completed on AutoCad by next weekend if you are interested I can send you the measurement. If you have already built the 6 way can you send me some pictures. t3customs@adelphia.net......Thanks.....Chris

Cletrac.org

Parts & Stuff => Product and Accessory Forum => Topic started by: ashacresfarm on January 18, 2004, 08:13:31 PM