Cletrac.org

Cletrac Tractor Discussion => All Models Except HG, OC-3, OC-4 & General => Topic started by: Bill Allton on March 30, 2004, 01:31:07 AM

Title: manual for cletrac w
Post by: Bill Allton on March 30, 2004, 01:31:07 AM
I would like to buy a operaters manual for cletrac W.  I need to know how much oil it holds an if it has a filter or what kind of filter? an what the rear ends hold an what? an other things that might get me going.

Bill
Title: No filter in W
Post by: Ray on March 30, 2004, 12:18:14 PM
Bill, the model W has no filter in the transmision and the only thing in the engine is a screen that bolts in the bottom of the oil pan, it looks like a round plate bolted up with like 6 bolts. Take this screen out and clean whatever sludge is in there before you run it or change oil.<p>Gear oil you can use 50wt engine oil or 90wt GL-1 mineral gear oil.<p>The manual only tells you to fill the trans up to the drive shaft level.<P> Click on my link below, I can supply a manual.
Ray