Print Page - Finaly a winch

Title: Finaly a winch
Post by: erik on May 18, 2004, 08:38:47 AM

I finaly found a winch for my OC3. It's a swedish made Mora Record winch which was an original equipement for the OC3 sold in Sweden. I did not get the fixture that goes with it but it should not be that hard to weld a new one up from scratch. You can se a picture of an OC3 with a similar winch under the photo album section on cletrac.org under "Johansson, Hans". This winch has 30 meter of 0,8cm wire and the pullforce? is 1000kgf. (Carco SG, 2800/1700kgf.) Wirespeed is 30m/min.
The Carco SG winch is both heavier and stronger.

Title: winch
Post by: Crawler Boy on May 18, 2004, 04:56:27 PM

Erik!

If you like i can take some photos on my Record winch and how its mounted??

Title:
Post by: erik on May 20, 2004, 06:35:22 AM

Thanks Crawler boy that would be great. I'll also try to get the fixture from the seller but it's a lot of job getting it loose because the fendera are welded on to it.

Cletrac.org

Cletrac Tractor Discussion => HG, OC-3, OC-4 & General => Topic started by: erik on May 18, 2004, 08:38:47 AM