Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - jonathanfleguel

#1
well igot the head all back on took me a while to get it to go had to bleed each injector i also got a good battery and cables turns out the starter works good so i got it to go andwhen it was first started the throttle response was good and it sounded to be making good power couldent move it because of the clutch, usually i pull start it but i was by my self. it seemed to get really hot kinda quick but the rad was full and the in and out hoses felt equally hot so it is ciculating. any ideas? also once it warms up the throttle takes a long time to respond. could this be something tight in the bottom end. i hope not
#2
well i annealed that gasket tonight turns out my fire box is big enough so i got a grate and stuck it inthere for a while then quenched it. just got to get the flake from the fire off. then put the head back on. i took the side of the injection pump off and all the plungers moved freely. i took the seat off because im gonna rig up a seat that i can actually sit in till i get an original (thanks bob). when i had the seat off i took the inspection plates off the rear end to take a look at the rear end and i saw that the left brake is not riding on the drum center the drum is walked out or the brake is walked in. which makes sense because its a littler harder to convice it to turn left. any ideas. whats the best oil for the rear end im gonna drain it it looks a little murky. filling the rear end fills the finals and the tranny right there all the same to what level do i fill it. tomorrow i think its gonna rain so im gonna put the head on and set the timing and see if i got a new machine or what :?:
#3
is that bobs AD beside yours.
#4
well i guess im gonna get an old grate and see if i can anneal that gasket. i think im gonna clean the haed off real good and have a look with a good light and see if i can find any cracks if not i think im gonna stick it back on with an annealed gasket and set my injection timing get her running and see if i still get the water in the oil, if its still dumping water in i might be down to see you bob a little sooner :D
#5
thats a great looking machine. just got the head off mine checking for cracks. hope to have mine pushing dirt for the spring. :mrgreen: oh and what color is that it looks sharp. i think id like to paint mine that.
#6
well. I took the shifter out and put it back into neutral worked out pretty good. then i decided to pull the head because i had the afternoon holy 40 head bolts  :lol: im starting to see maby a working dozer for spring time.
#7
where are the timing marks. i gotthe tranny stuck while trying to pull it yesterday i was pulling it in 3rd and when it fired i bumped it out of third but it dident come out of thirdf but the shifter felt out of third. now all i have is third and then one other position that just locks up the tracks. i am on the verge of selling it to my neighber to display in front of his shop but i kinda like the old girl i would like it alotm more if it would play ball but persistance is key. i am interested in the rad and clutch bob ill pm ya. thanks guys it would have been parked a while ago if not for your tech support.
#8
well i havent been able to tinker on the old girl in a while. but i was thinking and if the clutch is pooched where can i get another one. also how is the timing physically set on these motors do i disconnect the coupling then turn the injection pump any help would be greatly appreciated. i got it running a while back with no hood on it and the rad tilted back and the fan took a swipe at it i might be ablr to gob it up but is there anybody who has one pensylvania way my dad is headen that way soon. thanks also can i take the inspection plate off the side of the inj. pump with it running to see if a plunger is stuck. im sure i have more questions but thats all for now.
#9
sitting on the machine its on your left. thanks bob for the "how to" i will do that next time i get an afternoon to tinker.
#10
how do i check timing. i have changed the timing but that was on my cummins and i bumped from a known factory setting. how do i find the right spot or is it just trial and error also how do i do it on my truck the pump was turned?
#11
wel, i went up to the scrap yard to get some little stuff off the AD for my BD. and i was too late its been melted down. :cry:
#12
how would mating up a different motor to the tranny work? i ahve a 93 dodge with a cummins and i love and also know how to fix it and know where i can get one cheap. setting up a governer wouldent really be neccesary with twice the torque and 4 times the horsepower would it? im unfamiliar with governers. maybe just a throttle on your left brake you could conntrol with your hand because theres no room for my feet let alone another peddle. biggest problem i think would be mating it to the bellhouising any ideas. has anybody done this with any motor?
#13
im thinkin fuel because a sniff of either will keep it runnin i have to properly seal the primer because it problably sucking air through. i cleaned the oil filter and using the bleed screw filled the filter till it squirted out so the pumps working. just a curious question but how do you know if the govener is working. also one of the injecters gets fuel but it flows when cracked not spray. is that a fixable thing delivery valve? plugged line? when these motors do run right can they actually push dirt or do you have to be kinda ginger with them.
#14
im in canada, belleville ontario to be exact.
#15
that is a neat peice. good luck gettin her running :D