A few 20K pictures

Started by C. Props, February 24, 2007, 07:41:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

C. Props

I thought I would share a few pictures from my 20K restoration a few years ago. I still have quite a few more pictures to put up. The pictures are in the projects section.

http://filebox.vt.edu/users/wcprops

Jack Janzen

#1
Thanks C. Props - I really enjoyed the restoration photos.  I have a 20-K myself that runs, but I'm not sure just what the condition really is.  The future may hold some surprises as yours did.  I look forward to more pictures.  I think I'll save your photos as a how to in case I get into trouble.  -Jack

John D

#2
Quote from: "C. Props"I thought I would share a few pictures from my 20K restoration a few years ago. I still have quite a few more pictures to put up. The pictures are in the projects section.

http://filebox.vt.edu/users/wcprops
Nice photos!  Enjoyed the ones at the shows, stationary engines, etc!
John D
If you want to do what you want to do, you have to do what you have to do.

C. Props

#3
I have added a few more pictures to the 20K page. I still have to find the ones showing the low point of the restoration such as the differerential rebuild, the bare frame, and the finished tractor.

http://www.oldengine.org/members/cprops

John D

#4
Quote from: "C. Props"I have added a few more pictures to the 20K page. I still have to find the ones showing the low point of the restoration such as the differerential rebuild, the bare frame, and the finished tractor.

http://www.oldengine.org/members/cprops

I just came across this ad today for what the owner says is a 1924 Model K - reminded me that I had seen your restoration site recently

http://hudsonvalley.craigslist.org/car/289680735.html
John D
If you want to do what you want to do, you have to do what you have to do.

Blake Malkamaki

#5
I believe my friend Don Green in Kirtland, Ohio has/had a K-20 with a blade like that.

Blake
My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.