AG info

Started by Slingshot, March 27, 2005, 07:05:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Slingshot

March 27, 2005, 07:05:30 PM Last Edit: January 01, 1970, 12:00:00 AM by Slingshot
I have an AG Cletrac W/ 4 cyl herc. engine.. On the ID plate it states" AG, next line # 2X1812 .Any Info. ie; year, h/p etc would be appreciated. Also, appeares that the mag. Wico Model X, needs internal parts, small gear, cap etc. Are these parts available?
Thanx.

Robert Barbour

AG
#1
March 27, 2005, 08:06:19 PM Last Edit: January 01, 1970, 12:00:00 AM by Robert Barbour
From the serial number it is a 1940. Engine is a Hercules OOC  4" bore 4 1/2" stroke, 226 cu inces. Horsepower is about 30. Tractor weight 7000 lbs. draw bar pull in low gear from Nebraska test 260 in 1936 was 5254 lbs.
Robert from Vancouver Island BC

John D

#2
March 27, 2005, 08:11:28 PM Last Edit: January 01, 1970, 12:00:00 AM by John D
Quote from: "Slingshot"I have an AG Cletrac W/ 4 cyl herc. engine.. On the ID plate it states" AG, next line # 2X1812 .Any Info. ie; year, h/p etc would be appreciated. Also, appeares that the mag. Wico Model X, needs internal parts, small gear, cap etc. Are these parts available?
Thanx.
Your tractor appears to be a 1940 - they started with serial # 2X1702 in that year, according to info published on Yesterday's Tractors.

According to Cletrac publications, the drawbar HP rating is 27.  There is a Sales Data Spec sheet listed on the Cletrac.org website, which lists all the particulars - see Specifications and Technical Information.

As for the parts needed, contact Landis Zimmerman - he's one of the advertisers  - see his site: www.olivercletrac.com

Good luck with your AG !!
John D
If you want to do what you want to do, you have to do what you have to do.
Print
Go Up Pages1
User actions