Grease fittings ?

Started by Seabee on AC, July 30, 2007, 04:03:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Seabee on AC

July 30, 2007, 04:03:05 PM Last Edit: January 01, 1970, 12:00:00 AM by Seabee on AC
Recently purchased an OC3 to restore...was wondering where a gent might locate the grease fitting adaptor for the fitting on this unit? There a flat headed spring loaded sert (looks like the end of a rifle cartridge) Thanks!

Mike Shanley

#1
July 31, 2007, 01:24:23 AM Last Edit: January 01, 1970, 12:00:00 AM by Mike Shanley
Those fittings are for oil.  The rollers and front wheels use the same grade oil that is use in the transmission.  The weight is based on temp.

Read the Oil or grease pages on this site and above all read the Operators Manual for the HG/OC3.  Mike Shanley, Woodbury MN

farmerphil

#2
October 22, 2007, 03:18:58 AM Last Edit: January 01, 1970, 12:00:00 AM by farmerphil
They are called button head fitings.  You can get a complete setup from ZIMERMAN cletrac.  I ordered my adapter from john deere for 7/8 fitings.  McMaster Carr sells the oil lube gun.  But try Zimerman he has all the manuals to.  there are quite a few oiling spots.  phil

Mike Shanley

#3
October 23, 2007, 12:35:40 AM Last Edit: January 01, 1970, 12:00:00 AM by Mike Shanley
I believe that I saw an additive in a TISCO catalog that negates residual EP products in brake linings.  It sounds like a solvent that breaks down the EP residuals.  I'll be out of town for a few days but I'll try to look the product up this friday and get back to those interested.

As Blake says, your best bet is a straight 50 SAE non-detergent oil.  Mike Shanley, Woodbury MN
Print
Go Up Pages1
User actions