bg dozer problems

Started by harry111, November 06, 2007, 05:24:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

harry111

i bought a tractor from ebay. it was supposed to be a model dg in good running condition but after speaking to mr. zimmerman and telling him about the jxd motor he says i have a model bg.  now onto the good running part....  
it wouldnt stay running. and come to find out the fuel pump was bypassed so i bought an electric one to see if i could keep it running.
the oil pressure gauge wasnt working so i bought a gauge.
carberator was all gunked up so i cleaned it.
wiring was all messed up so i fixed that (alternator doesnt work.
new plugs and wires and battery.

she started but the anti freeze hissed itself dry from the overflow tube (many gallons in a matter of 15 minutes).
oil pressure goes to zero-blade wont push 2 inches of dirt in first gear because motor acts like it is dieing-she seems to be smoking and spitting oil from the filler tube
hydaulic fluid is milky white
governor working or not i dont know


any guidance would be appriciated.

Bob

#1
Sounds to me like the headgasket is probably bad or cracked head. It also sounds like the rings might be sticking or broke hence the excessive blowby. That could be the reason for no power too. The hydrolic fluid is milky because it got water in it and was ran through. Not uncommon. About the govoner I think if you pull the rod going to the carb it should have resistance. As far as setting it you will have to look at a book. I will if I get a chance the next couple days.

Hope this helps,
Bob
Certified Cletrac-tard

clueless

#2
Harry...if you'll pardon a poor joke at your expense, it sounds like you have big dozer problems, not bg dozer problems...
Unless you bought this for scrap price or part-out price, I'd suggest:
Copy the ad from EBay, that referred to it's model ID and that said it was in good running condition, because it obviously isn't. It's your proof that the ad was misleading, that it failed to give adequate  disclosure, and might even reach being fraudulent, depending upon circumstances.
Consider whether trying to repair everything that seems to be wrong will result in putting more into the unit than it's worth; you'll probably have to have a well-experienced crawler mechanic  go over it, unless you're highly experienced yourself (with all due respect, and my apologies if I'm wrong, but I'd guess from your questions you're not, at least with these).
My thinking is that it sounds like this thing has been used hard, if not outright abused, and has very serious (read:expensive) problems, quite possibly the result of being run into the ground with little or no maintenance, and that you should investigate what's available re' unwinding this transaction on the basis of misreprentation or non-disclosure of condition, etc..   With sympathy,  Bud
Nothing here is what it appears to be!

harry111

#3
well, i got off the phone with mr. zimmerman and he had an engine . i made a road trip today and bought the motor complete with all components.
mr zimmerman and (harold were very informative and helpful, i would recommend them to all.

i am going to keep the other motor and rebuild it over the next year or so. this way i have a totally rebuilt spare.

i emailed the seller who was selling it for a friend, and ive heard no response. i informed him of the possibility that this is fraud, and that he should contact his friend to see what he is willing to do about the $2500.00 dollar purchase price. i feel that some reimbursement is fair because it was not worth the money at all.

the only possitive about the sale info is that all of the pins and rollers were changed out. track is straight and the steering is on the money.

i will be keeping it now that i have the new motor, just another person that has me questioning humanity...