Cletrac Model #25

[John Kelly]

I have just  become the proud owner of a 1931-35 model # 25 Cletrac crawler. Iam new to the Cletrac, have had some experience with John Deere and Komatsu. It took all summer to make a road  heavy enough to support a ramp truck to get to the crawler. After two attemps we got it loaded and moved from my neighbors lot where it has sat for about 20 years.
  I took many pics before starting the tear down. The engine was stuck, but looked good from the outside,except for one freeze plug blown out by the dist. I pulled the intake and the head and discovered one of the jugs had filled with water, and frozen,and much to my chagrin had cracked the cyl wall verticly down! I can have it sleeved- no problem, but are any parts avail for the water pump,Clutch, trans, track chains-pins etc Shop manual? I did free up the tracks and final drives, trans was in neutral.
  Oh I almost forgot Does any one make any reproduction sheet metal I need the side covers, and track skirts.

If any one has interest i can post some pics    Thanks in advance for any help

Thank you John Kelly
Readsboro Vermont

[Bob]

I see you are in Vermont. Are you coming to the show in Ludlow Vermont? It is featuring crawlers and I know for sure there will be Cletracs and Cletrac guys there. I am going myself. It is going to be this weekend. The 26 and 27.

[John Kelly]

Thanks Bob!
I will be there!
Johnn Kelly

[Bob]

I will have my AD there. I shouldn't be hard to find!

[diggerdirect]

Hi Bob, thanks for the info on the Vermont show!, I am making plans to go on the 26th barring anything unforseen, (27th is opening Bow season here, cant miss that) Will look you up & introduce myself!



Al Parker
'diggerdirect'

[Bob]

Cool, always glad to meet other Cletrac nuts/conaseurs. I always figure this about these tractors, at times they can be very frustrating, but I have met alot of great people thru and because of them.

Bob

[Eric Severance]

Amen to that Bob !

   I'll be there Saturday too guys. Look for the little GG General.