Messages

 How do I edit my ad or remove?

When you have the clutch out check the flywheel bolts. A loose flywheel will rattle in neutral but not so much in gear.

Copper should not be used for Brake Lines. The wall strength is not as high as steel tubing and can burst at any time pressure is applied to the brakes.

Looks like my OC-4

NAPA if it is NOT in the computer good luck. If they had books I don't think the counter people can read.

The fan belt is a belt that a lot of places sell as a universal replacement belt. It is adjustable to fit many different lenghts by removeing segments. I have seen them in the past and they work for a short time.

Question: My loader tag says the loader is a Oliver OC-46 loader. Is this the same as a Ware loader?

I removed the grease fitting from a track roller and found the roller had been filled with grease instead of oil.
In looking at the roller parts I don,t see how this will lube the rollers. How can I clean the grease out short
of dissasembling and cleaning all the rollers?

Thank You

In my OC4-3G operators Manual the operating weight is approximatly 4,305 pounds. How huch the loader is I don't know as I can" find my loader manual, it is somewhere in the pile.

Since last post I have removed head from engne and found about a bushel of OATS in cylinders.
Removed Oats and cleaned piston tops. cylinder walls look good, minimial ridge at top and no scoring.
Removed valves one exhaust valve needs to be replaced all others in good shape.
When the sun comes out and no rain I will put head back on and hope she will start.
Also took carb apart and cleaned float was stuck, found gasket set a farm supply store gaskets all matched for some Ford tractor.
The Head set and Valve came from Zimmerman.
                                                          LeRoy

After about 10 years of trying I finley convincied neighbor to sell the OC-4 that has been in shed for 30+years,
Got it home and discovered the valves are stuck open so will need to do a valve job on it.
Ordered gaskets from Zimmerman. as soon as they come I will remove head and see what it looks like.
Will post what I find and how thungs go.

                                                                       LeRoy