OC-12 with Oliver blade.

Started by John Schwiebert, April 30, 2005, 11:30:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

John Schwiebert

April 30, 2005, 11:30:28 PM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
I need a picture of one . What kind of linkage is used to support the blade from the push arms. One side has a turnbuckle the other side is ridgid. Which side is correct?
John Schwiebert

Blake Malkamaki

#1
May 01, 2005, 12:39:37 AM Last Edit: January 01, 1970, 12:00:00 AM by Blake
Quote from: "John Schwiebert"I need a picture of one . What kind of linkage is used to support the blade from the push arms. One side has a turnbuckle the other side is ridgid. Which side is correct?

John, my OC-12 is over at my cousin's now, but when I get it back - or get over there with a camera - I will take some pictures for you.

There are different blades for the OC-12: a grader blade which angles and is lower, and a bulldozer blade which is higher and does not angle. My blade is about 3 foot high. The bulldozer blade does tilt via the turnbuckel.

Blake
My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.

John Schwiebert

#2
May 01, 2005, 01:45:02 AM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
Blake: Thanks, there is no rush. This is a fall project. I will get you more details too. Thanks.
John Schwiebert
Print
Go Up Pages1
User actions