HG "U" joints

Started by VaMike, March 06, 2008, 03:54:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

VaMike

March 06, 2008, 03:54:35 PM Last Edit: January 01, 1970, 12:00:00 AM by VaMike
Does anyone know of a source for Spicer type joints in the 1-3/16"X6 spline?
Best,
Mike

Mike Shanley

#1
March 12, 2008, 02:43:03 PM Last Edit: January 01, 1970, 12:00:00 AM by Mike Shanley
I believe the spline shaft and U joints are the same as those used in the Ford Model A cars.  Try your local Model A gear heads.  Mike Shanley

John Schwiebert

#2
March 12, 2008, 02:55:42 PM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
Well I think you are half correct. The early ones are like a model A Ford. The later ones are Spicer. I got some made for Landis a long time ago when I worked for Dana (Spicer). Now do you need both halves?
John Schwiebert

VaMike

#3
March 15, 2008, 02:23:04 PM Last Edit: January 01, 1970, 12:00:00 AM by VaMike
I am seeking a yoke to use on a HG transmission for a re-power. I want to use Spicer u-joints as they are easy to find, and I can have a drive shaft made locally.
Best,
Mike

Les Darsow

#4
March 31, 2008, 02:37:18 PM Last Edit: January 01, 1970, 12:00:00 AM by Les Darsow
I have found them in a catalog at Catco. Any Dana/Spicer dealer can order them. I have the part number as : 2-4-1301. It is found on the Dana website via Catcoparts. Go to "Expert System" then go to  "Driveshaft" then go to "Identify Part by Dimension" then go to "End Yokes" then go to "Splined (all others)" then go to "Select a Series 1310". It is listed as a 1.883 x 6
I hope this helps.
Print
Go Up Pages1
User actions