IXK3 starter parts

[countryguy828]

I have been working on my HG and turns out that the bendix/drive gears are pretty much shot. The gear snaps in as it should but the threads are so worn it jambs up and won't release. Is there a source for these parts? It could use a set of brushes too. I have had pretty good luck finding delco parts but not so much on autolites based on past experience.

By any chance anyone have an exploded view of the starter? I have a sneaking suspicion there is extra spacers/washers in there and I want to double check against something.

Thanks,
Dave

[Jack in NB]

Hello Dave -

Have you tried Zimmerman Oliver Cletrac?

They have probably the best stock on the continent. And if they don't have it they will probably help you find the parts.

http://www.olivercletrac.com/

[Robert Barbour]

The Auto-Lite MZ-4098 was the first starter used on the HG, from SN 5GA000 to 25GA377. At SN 25GA378 they switched to a Delco 11029602.  I to would recommend Zimmerman's, they are very good to deal with.

[countryguy828]

Thank You for the help fellas. thanks to your part number I was able to find this https://www.ebay.com/itm/NEW-STARTER-DRIVE-MPLS-MOLINE-WHITE-OLIVER-HERCULES-COCKSHUTT-COMBINE-HARVESTER/360826502271?hash=item5402ef7c7f:g:MqcAAMXQnYJQ9Nsl:rk:11:pf:0 on ebay. Unfortunatley the price is out of the range I can justify at the current time. But it gives me needed information to possibly find another source. Lots of times I make what I can but this is a little out of my capability as of now.

Dave