OC-3 Anderson Blade

[kyle]

I am looking for some information for the Anderson Blade Hydraulics on a 52 OC-3. I need to rebuild the control valve and would like to know if anyone has any information on seals or possibly a manual of some sort.

[hotratz]

There is really not much to the controls. You can pull the existing seals and get numbers off of them. Napa usually has these.

[John Schwiebert]

Do you have a name and or a casting number on the valve? Gresen is a popular brand for one. Also remember a seal kit only keeps the oil from leaking out and dirt from getting in. If your blade does not hold position it is not the seals.

[kyle]

the casting number in the valve body is A115. It also has the following numbers stamped into it C1310-1FC-3 and 1000. I removed one o-ring in the valve body and one o-ring between the valve body and the mounting plate. There is also a gasket between the two halves of the housing once i took it apart. The o-ring are easy enough to find replacements but the gasket I would like to replace with something new. I would also like to know if there is more than one o-ring that goes into the housing around the valve cylinder. Does anyone know if there are any manuals for the anderson blade hydraulics? Thanks for the replies!