water pump

Started by ozzy, July 23, 2003, 09:08:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

ozzy

July 23, 2003, 09:08:17 PM Last Edit: January 01, 1970, 12:00:00 AM by ozzy
Hi Everyone,  My waterpump is dripping antifreeze. Does anyone know if replacements are availiable or can they be rebuilt?  HOPE I CAN GET A RESPONSE! THANKS OZZY

thecatskinner

#1
July 23, 2003, 11:37:06 PM Last Edit: January 01, 1970, 12:00:00 AM by thecatskinner
Replacements are available.  If NAPA can't help you call Landis Zimmerman, 717-738-2573.
The pumps can be rebuilt but the bearings and shaft are an assembly.
You should be able to replace the seal if the shaft and bearings are OK. The shaft has to be pressed out of the pump impeller.

ozzy

#2
July 23, 2003, 11:57:50 PM Last Edit: January 01, 1970, 12:00:00 AM by ozzy
CATSKINNER,   Thanks for the info. Ill check with my local napa store first. Thanks Again OZZY

John Schwiebert

#3
July 24, 2003, 11:07:41 AM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
I did one not too long ago. There are several different styles of seals. If your bearing and shaft assembly is good you should get by for less than $40.00 if you do it locally. There are at least two styles of seals used and you don't know which one you need untill you take it apart. Gaskets can be made and are also available fromAGCO as are the seals. I can come up with most of the part numbers. The one little gasket is NLA but it is no big deal to make one.
John Schwiebert

ozzy

#4
July 25, 2003, 07:27:24 PM Last Edit: January 01, 1970, 12:00:00 AM by ozzy
jOHN,  Thanks for the info. As soon as I get my final drives back together Ill be working on the waterpump & Engine. Thanks OZZY

rnrupnorth

#5
July 25, 2003, 11:32:04 PM Last Edit: January 01, 1970, 12:00:00 AM by rnrupnorth
Zimmerman has rebuild kits but you will need a press to rebuild it. No other way to get shaft in and out.
Print
Go Up Pages1
User actions