oc-3 track adjustment

Started by Jim Nave, May 22, 2004, 04:01:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Jim Nave

May 22, 2004, 04:01:31 PM Last Edit: January 01, 1970, 12:00:00 AM by Jim Nave
The L H track is rubbing and tearing up the driver gear.  Is there an adjustment for this?  Thanks much

Ray

#1
May 24, 2004, 11:14:54 AM Last Edit: January 01, 1970, 12:00:00 AM by Ray
The track can be tightened with an adjusting bolt right behind the front wheel, If no adjustment is left, then the track's pins and bushings need to be replaced. also check for any loose bolts at the back where the sprocket fastens to the hub.
Ray
My comments are not meant to discourage other members from posting, I encourage everyone to voice their opinion.
VENDOR: Zimmerman Oliver-Cletrac
Parts for Oliver and Cletrac Crawlers is our specialty.
www.olivercletrac.com
Print
Go Up Pages1
User actions