Commonality between Cletrac HG and Moline BG Wheel Tractor?

[Orangeman]

Hi Guys: Need some expert help... my Moline friend is working on his Moline BG wheel tractor... his Timken Bearing Races and Snap Rings need to be replaced.  The machine uses a Clark 4 speed Transmission... Is there commonality between the tranny in any Cletrac Application and his BG.   We need to replace either new or new old stock the following Timken Bearing Races and Snap Ring. The part numbers are as follows:

1. 31523RB
2. 15523RB

Any bearing and transmission experts really could use your help. Glad to be back on the board after a beautiful summer. Take Care Cletrac Guys!

Orangeman!!!

[Blake Malkamaki]

Is the BG Moline the tractor that came from the BF Avery? If so, it's very close to the Cletrac General as Cletrac made the BF Avery tractor.

The General and HG use a Clark transmission.

[Orangeman]

Blake: Thanks for the reply... is the cletrac HG a three speed or four speed Clark?  Yes the BG is the machine that was purchased from Avery.

[Blake Malkamaki]

I was thinking it was a model BF.

The General and HG were 3 speeds, but I have a 4 speed for an HG.

Blake