Front track support reinforcement.

[Dr Bert]

While restoring my HG68, I solved the problem of the weak union between the front support and the main frame by Veeing out around the backing plate inside the frame and welding all around the 4 sides of the plate.  I then welded a 5/8 inch by 4 inch piece to the front of the support where it bolts to the mainframe, bored two 1/2inch holes ahead of those done at the factory and cinched it altogether with # 8 bolts.  Painted it is hardly noticeable.  It is not original, but is very strong.
     Others have probably done this, but I have not seen it mentioned.  Might help someone in the future.  Have a good one!!

[Andy]

There was a field modification kit made that welded to the frame at the bellhousing. This was free, all you had to do was get your tractor to them, they would weld it on. I have one that was done this way, it is a real clean modification, looks factory.