Sparkplugs

[Crawler Boy]

Im loking for the correct plugs to my OC-3
because i dont have the right temperature
on them
(the plugs ben black after a while)

IvÃ,´e have the correct timing and adjusted carburator.
hopefull some one can crossover them to
NGK, Borsch or Champion because we only have those brand in Sweden.

Crawler Boy

[Blake Malkamaki]

The original plug when burning gasoline was the Champion #1 Commercial. I think the coresponds to the current W-14 Champion. Not certain on this, so ask your parts store. I know the thread is 7/8 inch.

I don't care much for current Champion spark plugs, so I would get Autolight, Motorcraft, AC, or something else. Bosch should work well.

Good luck,

Blake

[thecatskinner]

Here is a link to a cross over list and heat ranges:
http://www.antiquetractors.com/Research ... g_List.htm

[thecatskinner]

Crawler Boy, I left this for you at YT, in case you didn't see it here it is again.
The Bosch cross over for the 1 COM is Z120T1.  If you want to go one heat range hotter, Z45T1.
The link for the cross over numbers is:
http://www.oldengine.org/members/diesel/equiv.htm

Scroll down to the 22 mm listing.