HG or OC-3 Paint codes

Started by Nick C., February 20, 2007, 07:03:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nick C.

I have two OC-3 crawlers and one HG crawler that ALL need paint jobs.  I am going to tackle one at a time.  I originally didn't want to spend allot of money on paint, but I think that after spending a ton of hours prepping each crawler for paint, that I want to make sure I don't have to do this again for some time.  That being said, I may opt to buy an automotive paint and go for the "glossy" look.

I have one OC-3 that is Cletrac Orange, another that is Yellow, and the HG that is rust!  I was originally thinking of painting all three yellow and using Highway Yellow paint from my local CAT dealer.  Pretty cheap (~ $30-40 per gallon).  I starting using the CAT yellow primer on some parts that I rebuilt on the HG.

I am still tossing around the idea of painting ALL 3 the same color, or going to different, original colors (Orange, Yellow, Green).  Can anyone give me paint codes for some of the "better" automotive paint out there (ie; PPG, etc)?  Other additives and suggentions would be very welcome as well.  I am a novice at painting well, but do have an older "top-of-the-line" canister type paint gun and shop size compressor.  I also have a good filtered paint mask to do this without breathing that bad stuff, like hardeners, etc.

Any help, suggestions & tips, direction is greatly appreciated!  I use these crawlers in my small farm operation, so they won't be parade tractors.  I just want them to look and run good to last for another 1/2 century before I pass them down to my 2 year old son!  :)

walter hudson

#1
The auto quality paints are expensive but down the road you will be glad you spent the money. Euipment enamels look pretty good when first painted but will fade quickly even if the tractor is kept inside. I have a HG that I painted  with dupont Centari ten years ago ,that still shines like the day that it was painted . The dupont code for yellow is 421A . The hg green is the same as the fleetline wheel tractors .  If you want the orange let me know and I will find it .
Walter

Nick C.

#2
If you can get the Cletrac Orange code for me, that would be great!  I really appreciate the help!

Orangeman

#3
Walter do you have the paint code for the Orange Centari... I am going to repaint the 42 HG Orange and I would like the paint to last more than a couple years. Thanks Orangeman!
RP

walter hudson

#4
I dont have the code at home I will be at my shop tomorrow and find it. The codes for green HG or OC3 's are: red 99L-3752,stripe yellow: 99L-11611, green: 99L-8746 . These are martin senour #s (Napa) ,they can be crossed To Dupont .
Walter

John D

#5
Quote from: "walter hudson"I dont have the code at home I will be at my shop tomorrow and find it. The codes for green HG or OC3 's are: red 99L-3752,stripe yellow: 99L-11611, green: 99L-8746 . These are martin senour #s (Napa) ,they can be crossed To Dupont .
Walter

I believe the paint codes you are looking for [Cletrac Orange] are:
DuPont Dulux 017H  or
PPG Ditzler 60583
John D
If you want to do what you want to do, you have to do what you have to do.

walter hudson

#6
John is correct the only original code that I know of for Cletrac orange is:661-017 -G which is Dupont  air dry equipment enamel ,but to the best of my knowledge it is no longer available . The best alternative that I have found is Martin Senour [Napa] 99L-1952 or 53L-1952 .The prefixes are for different types of enamel . It can also be mixed in base/clear. In my opinion this code is slightly lighter than the original .
Walter

we@nb

#7
would an oc046 have been originally orange or yellow?
wre Chamcook  NB

walter hudson

#8
All OC46 tractors would be yellow .