Need some pictures

countryguy828 · March 09, 2012, 04:53:49 AM

Hey guys I was wondering if someone could post some pictures for me.

I'm working slowly on my HG. Trying to figure out what some stuff should look like.

1: Clutch pedal area
2: driveshaft cover / battery tray
3: PTO engage lever
4: under seat toolbox (I think thats what goes there)

Thank,
Dave

oliverchris · March 11, 2012, 05:14:10 PM

Here's one to start you off, but your best bet would be to get yourself the parts and operator's manuals from Floyd County Museum, Charles City, Iowa (641) 228-1099

countryguy828 · March 12, 2012, 11:23:58 PM

Thanks Chris,

I have the service manual but it isn't very clear. One of the ones thats been copied a hundred times.

I will have to post some pics about what I am curious about.

Dave

oliverchris · March 13, 2012, 12:50:37 PM

The toolboxes are pretty rare. But they just slide into a recess found on some pan seats. To my mind they are not big enough - they are just a thin rectangular box. I have a home-made one on my HG. Will try to get a pic of it soon.

countryguy828 · March 14, 2012, 03:29:02 AM

I figured with a good picture and some measurements I can probably make something up that is close to original looking. Don't plan on really using it, just want it there since th bracket is on the seat.

Dave

countryguy828 · March 24, 2012, 03:15:51 PM

Here is a closeup of where the clutch pedal mounts to the frame. Is there a pin broken off of something here? It looks like that may be the case and another one added, I am not sure and wanted someone to confirm whats going on here.

Dave

oliverchris · March 26, 2012, 01:01:28 PM

From memory, that looks right with the clutch pedal going on that round rod that sticks out the left hand side, but I will have to go and look. Maybe that square bolt head has been added?

countryguy828 · March 26, 2012, 03:26:34 PM

The bolt head seems to act as a stop to keep the pedal from going too far forward. Guess I will leave it there.

Dave

oliverchris · March 26, 2012, 05:19:36 PM

That's right, but I was wondering if normally there's a tab welded or folded there.

oliverchris · March 28, 2012, 12:49:44 PM

Here's the rod 'stop' that is there instead of the nut you have

countryguy828 · March 28, 2012, 03:50:08 PM

I wonder if they just welded the nut on there to make it stop a little early or take up for the pedal bushing being worn.

Dave