Late HG, Early OC3 Ware Loaders

Started by oliverchris, September 17, 2012, 10:35:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

oliverchris

September 17, 2012, 10:35:56 PM Last Edit: September 17, 2012, 10:40:27 PM by oliverchris
While digging for 3WI valve information I found the following about early Ware loaders for late Hgs and OC3s:
Model HGF Loader (serial numbers A-1000 to A-1100) - with backfiller blade, humus bucket, digging bucket
Model HGF (inc. 3-FT and 3-FH) Loaders - with backfiller blade, humus control or trip-bucket, material control or trip-bucket
Model 3-FST Loader - with backfiller blade, humus bucket, material bucket
Model 3-FSH Loader - with backfiller blade, humus bucket, material bucket
Let me know if you ever need to know any pump or valve part numbers...

Not sure yet of the differences between them. I've seen a few, but mostly in quite a mess!
Specialising in Oliver & Cletrac Crawlers & Parts for HG's, OC-3's & OC-4's from the 30's to the 60's. OC-6 and others from time
1945 Cletrac HG42 + electric snowblade
1952 OC-3-31 sidewalk plow, OC-3-42 + Ware 3-WI (several)
OC-3-42 Heller Universal Trencher
1957 Oliver Super 55, 1958 Oliver 550's Gas/Diesel, 1970's Oliver 1255 FWA
1969 White 2-44 13LL (loader/backhoe)
OC-4 4 cyl. Anderson Dozer, OC-4 Series B 6-way Dozer, OC-46 Series B Loaders
OC-46-A Experimental Crawler Loader

jerdbob

#1
October 07, 2012, 03:57:49 PM
My hg came with one of those loaders on it. The model on the ware plate says hgf, ray zimmerman sent me a three page flier on it. I'm gonna try to reuse it with a few little welds.( metal still good). I only have the 3 ft bucket though.  Thanks, Jerry.
Jerry  Mc
Print
Go Up Pages1
User actions