I am back....still have Oliver HG

Started by Tom in NH, February 15, 2003, 09:21:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2
User actions

Tom in NH

February 15, 2003, 09:21:12 PM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH
Hi gang,
I am back after about 10 months....been too busy with family and work...married life will do that to you. Anyways I am still working on the HG...same as the OC-3. I have the gearbox out and the transmission gears removed ( to make it easier to drill out the broken bolts where the final drive case attached to). Boy is it in rough shape...transmission main shaft spline is wasted, gears are stripped on the edge, etc. Slow and time consuming but worth the therapy. Lucky I have the parts manual to refer to. Hope to have it moving again this year.
Regards,
Tom

pvcarey

#1
February 16, 2003, 04:22:32 PM Last Edit: January 01, 1970, 12:00:00 AM by pvcarey
sounds like you have a project started, can you post some pictures for us?

Tom in NH

#2
February 16, 2003, 06:03:16 PM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH
How do I attach 9 pictures? Seems like I can only attach 1 item.

erik

#3
February 17, 2003, 09:01:09 AM Last Edit: January 01, 1970, 12:00:00 AM by erik
Tom
I donÃ,´t think itÃ,´s possible to post more then one picture at a time, better send them one by one.
Erik
Here it is!

Eric Severance

#4
February 17, 2003, 04:11:53 PM Last Edit: January 01, 1970, 12:00:00 AM by Eric Severance
Tom,
    I have some HG and OC-3 partsers over here if I can help out in any way. I know those final drives had a habit of loosening up and reaking havok on the studs and transmission housing.
                  Eric in VT
"No matter where you go, there you are"

Tom in NH

#5
February 18, 2003, 12:27:23 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH
Erik and Eric,
thanks for the replies...here goes with the pics....I hope I don't mess anything up!
Regards,
Tom

Tom in NH

#6
February 18, 2003, 12:28:08 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#7
February 18, 2003, 12:29:32 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#8
February 18, 2003, 12:29:54 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#9
February 18, 2003, 12:30:39 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#10
February 18, 2003, 12:30:57 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#11
February 18, 2003, 12:31:20 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#12
February 18, 2003, 12:31:40 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

Tom in NH

#13
February 18, 2003, 12:31:56 AM Last Edit: January 01, 1970, 12:00:00 AM by Tom in NH

erik

#14
February 18, 2003, 09:06:13 AM Last Edit: January 01, 1970, 12:00:00 AM by erik
I love the look of that blade setup, what brand is it? The Anderson blade looks much neater and lighter though.

Does anyone have sales leaflets, drawings, close up pictures etc. of the Anderson blade? I want to make my own because I canÃ,´t find any in Sweden.

Tom, keep posting pictures!

Erik
Here it is!
Print
Go Up Pages1 2
User actions